Recent content by dlmallory

Thank you Drock. I was able to get the new compartment boxout and decided to put carpet in it. Overall the wood was in very good condition. I cut the new hole for the compartment and put new carpet on the wood. Got the anchor compartment lid mounted and the new compartment lid mounted. Have to...

Was able to get some more done finally. Been too busy working and trying to finish my new aluminum fishing rod rack for my surf poles. With the hole cut in the bow and Styrofoam removed. Next step is to box out the area. Im going to be storing life jackets in this compartment. Debating whether...

Was finally able to get the seats back in along with getting the battery floor done. Reinstalled the batteries and made all the electrical look nice and neat. I started working on the extra compartment I wanted to add in the bow but the rain got me before I could remove the cut out and take a...

Was able to pull the floor out. Forgot how many screws I had used to hold it in place haha. Definitely signs of a soft spot but overall looked very good. Rerouted some wires and installed a PVC runway across the center of the boat. This time I added some foam under the floor not only for...

That time again. Looking at ideas on how I want to change up my boat. Well since I installed the floor 4 years ago, the boat has definitely been used a lot and finally after just getting back from camping a soft spot was found in the floor. I had previously sealed the 1/2in plywood with Thompson...

Considering painting the boat. Any suggestions?

New Idea, This summer Im going camping where the only way to and from the site and around the area is by boat, (Rain or Shine) Has anyone tried to put an enclosure on a jon boat? cant use a tarp I need to be able to see while Im driving. Any ideas?

Here is what I did.

Installed the stereo, The bimini, and still doing some fine tuning. Had to modify the fenders because the tires were slightly rubbing when I would hit a big bump.

I have a 1985 Evinrude 40 HP Model Number e40rlco. I am looking at converting it from the tiller to remote controls and steering. How easy or how hard is this to complete and what do I need exactly. Any help would be greatly appreciated. Also looking at putting a power trim and tilt on the...

Not exactly sure what is going on here. The other day I hooked up my trailer lights and on the way to the boat ramp they worked fun. Everything the running lights, brake lights and turn signals. Then on the way home I was told that I had no brake lights or turn signals. I am not sure what...

Just about done. I mounted the seat and pedestal on the front of the boat. Got to trolling motor all wired up and ready to use. Waiting on the stereo to come in tomorrow so I can install that. Then put two battery cables on the second battery and Im all done.... Well atleast for now until I...

Got the Lights all wired up yesterday and **** they are bright. Also picked up a deep cycle battery for the trolling motor. Plus i upgraded the tires from 4.8x12 to 5.3x12 and got a new trailer jack since the other one broke. Next thing I want to do is install a stereo and a ladder to get in...

Been busy working on it. Got a bow mounted Minn Kota Trolling motor 40lb of thrust for the front and it works great. It moves the boat around better than I thought it would. Ordered the bow seat and pedestal. Put guide posts on the back and brake lights on them. Replacing the old lights on the...

Very nice Boat!