Thanks guys I sent the new prop and original to the prop shop. I think the are going to look at the hubs.
I think the hub was not drilled out correctly on the prop only because it seemed to get stuck in the same spot if I tried to put it on backwards. I mean same spot on the prop. So 3/4 the...
I have 1969 25hp Johnson - I spun the prop I believe. High rpms no go. I could not find the hub parts So I purchase a replacement. It goes about 1/2-3/4 the way on and stops. I cant push it on. The that was on there goes on and off easily.
No sure if this common-
I validated I purchased the...
I have a 15" Jon boat- It has bench towards the front and one in the back. It does not have one in the center. This boat is older and has a track system so you can move the benches.
I have a couple kids so would like another bench for the center of the boat. It would be nice if I could remove...
I was going to cover the foam with indoor outdoor carpet-The pink foam is sturdy stuff I have small piece and stood on it didn't move.
I guess I was worried that the standing on the floor of the boat could cause issues
Can the floor of a jon boat hold a persons weight?
I would like to replace the 3/4 plywood with pink foam between the supports (not sure what their called). I'm not sure if you would be able to put weight on the floor then. This would drastically reduce the weight of the boat. I would like to...
Ok i need to replace 2-3 rivets on my john boat
the hole will be 1/4
The rivets will connect the hull to the frame
what length of rivet should i get if i do a solid or blind rivet?
Thanks
im in wheaton west of chicago.
Where do you find larger SS screws with the corrected head?
I'll try to get some pics tonight.
Does any were sell solid rivets?
I puchased a john boat, first one
trasom plywood was gone i just noticed. First time out took on some water. Filled the boat with some wat 15 or so rivets leak and they all look to be coated in something already. Also i had to remove the transom support drill out the rivets the holes are out of...