Recent content by masterbaiter

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. masterbaiter

    masterbaiters 14 foot build

    its been awhile since I added anymore pics of my boat to the site. been busy with work and projects around the house. I built a rod locker and added some cup holders and rod holders ( courtesy of longshot) :beer: I also decided to mount my transom mount trolling motor to the bow of the boat...
  2. masterbaiter

    DrNip's Weld-Craft 1248 - Hit 32.1 MPH!!!

    Glad to hear you will be hitting the water soon!! I was just reading up on your post its crazy what you have been through. Good luck with the new motor and hope you catch lots of fish. btw I like the way your build is coming along :beer:
  3. masterbaiter

    masterbaiters 14 foot build

    thanks bro! im like 40 mins west of Albany. god some more work done today I got the plywood all cut and gave it 3 coats of thompsons water seal. I started my carpet for the floor and front and rear decks. The carpet glue I used was a total pain in the a$$ to use but it seems to bond fast and...
  4. masterbaiter

    masterbaiters 14 foot build

    the weld stays strong just a pain to work with takes lots of practice. it does what it says though no complaints yet
  5. masterbaiter

    masterbaiters 14 foot build

    It did when I bought it. I removed the ghetto boat lift kit and just redid the bunkers on the trailer and its sitting normal now.
  6. masterbaiter

    masterbaiters 14 foot build

    i cut all my plywood this afternoon but didnt take any pics due to this week long rain we have been getting.when the weather breaks i will have more pics to come
  7. masterbaiter

    masterbaiters 14 foot build

    thanks for the tip rscottp 8) i decided on removing the center bench seat to make room for a place for my kids to roam while they get bored and a rod locker.The seat came out in a breeze and the foam under the seat was loaded with mouse holes and all sorts of stuff stuffed up in there. i just...
  8. masterbaiter

    masterbaiters 14 foot build

    i used a paintbrush to paint the boat i think a roller would have been alot easier to paint the boat to get rid of the brush strokes but over all it looks good. whats a good site for resizing pics. i have a ton more pics of my deck and floor but tried to upload them and there oversized. i...
  9. masterbaiter

    masterbaiters 14 foot build

    after 2 cans of aircraft remover, lots of sanding and leak test I decided to pick up a gallon of the rustoleum high gloss gray paint and get to work "with the help of 4 and 6 year old kids" The rustoleum paint goes on real nice and after 3 coats I was impressed with the results
  10. masterbaiter

    masterbaiters 14 foot build

    I picked up this old boat last year on the barter section of craigslist after swapping even for a 35 dollar engine that "didn't run" after a 20 minute carb clean the motor fired up nicely. I used the boat all last season for fishing trips with the wife and kids and she doesn't leak a drop. I...
Top