Recent content by muskiemike12

My motor is mounted one hole up on my 20’ Suncruiser with a 90hp 4 stroke Mercury 20” shaft.

[emoji23][emoji23] Sent from my iPhone using Tapatalk

I’ve been using them for years. Even before there were octopus style weedless hooks we used the old weedless long shank Eagle claw. They do work quite well.

A file called a flat *******. Used that all the time when I used to work in a fab shop. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Lund and Crestliner will also hold a much better resale value. Sent from my iPhone using Tapatalk

Lund Sent from my iPhone using Tapatalk

You can mount it on the bow if that’s where you want it. You’ll have to fabricate a mount for it if you can’t clamp it over the gunnel. Closer to center is best. Loosen the screw below the head on the motor and you can swivel it around 180’ for a bow mount. Mine is clamped over the gunnel...

There should be a nipple on the rear starboard side of the motor where the water pees out. That is the tell tail. Fish it out with something. It can get plugged up with weeds and gunk. Sent from my iPhone using Tapatalk

The tell tail could just be plugged. Clear it out with a piece of thin wire while it’s running. Sent from my iPhone using Tapatalk

Thanks!! There is about 3 inches of clearance on the fenders and about 1 inch on the guides on the sides. Sent from my iPhone using Tapatalk

This is my new boat. Tracker Pro Guide V175 Combo. I did the break in on the motor on Saturday morning and played in it the rest of the weekend. Sent from my iPhone using Tapatalk

Sounds just like the problem I had with my 74’ 9.9 Evinrude. A new fuel line fixed it for me. Sent from my iPhone using Tapatalk

The live well pump on my pontoon has about 15’ of run and a 4’ lift. It should work! Sent from my iPhone using Tapatalk

It’s last years model. New ones are striker plus and have gps. Sent from my iPhone using Tapatalk