Recent content by paradactal

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. P

    Leveling a floor and deck?So i

    Straightedge across the gun whales. Love it! I'll play with that for a while.
  2. P

    Leveling a floor and deck?So i

    So I have been reading and reading and after scratching my head over and over about exactly how I am going to tackle this new to me 14ft Gregor. My question is, How do I get the casting deck and floor level? my thoughts are just to lower the trailer and put a level on the seat, and when it shows...
  3. P

    Motorguide power plug?

    So just an update, I was in Wally World and found a plug that looks like it will do the trick. Just a regular ole Atwood trolling motor conection. It was $17 there, but I got it on Ebay for $7. Should get it in a few days.
  4. P

    Motorguide power plug?

    It's the the 3rd wire that is confusing me. I assume that the orange wire goes to the pedal is power, right?
  5. P

    Motorguide power plug?

    Picked up a Motorguide 765 24v trolling motor this weekend. I can't seem to find a plug that will work for this motor. The motor end is a 3 prong. Orange going to the pedal and black and red going to the motor. Just looking for an easy way to go straight to my battery(s). Any help out there?
  6. P

    Rust in bottom of 6gal gas tank

    6gal Tank - $105 Fuel line assembly $40 Quick connect $15 Gear oil $10
  7. P

    Rust in bottom of 6gal gas tank

    So I broke down and bought a new 6g plastic tank. Tank has an inline pressure regulator made my mercury. Also got a new fuel line assembly and swapped out the old merc style fitting to my new line. With it , I put a quick connect after the regulator so I can use the same tank for both motors by...
  8. P

    1972 johnson 9.5hp

    https://boatinfo.no/lib/library.html# You can print out what you need here to get you started
  9. P

    Rust in bottom of 6gal gas tank

    OK, now I'm a little overwhelmed! I just bought a used 6gal tank and it looks pretty good on the inside, BUT, I dont have the right connections. I have 3 tanks now all with different fittings. I am trying to hook up a 1975 Merc 20hp. Forgive me for my ignorance but it has the round connection to...
  10. P

    Rust in bottom of 6gal gas tank

    Wow! Some really great info. The patches are about 2"x2" or so. It's definitely not a family heirloom. Just didn't have the $100 for a good tank right now although I did find a metal 6 gal on Craig's list and am picking it up today for $40 with hose and bulb. So hopefully that looks good on the...
  11. P

    1975 mercury 200 hard to pull

    I would live to put a electric start on. What's the ballpark cost on something like that and skill level?
  12. P

    1975 mercury 200 hard to pull

    Current pic of minr
  13. P

    Rust in bottom of 6gal gas tank

    Not sure if this is the right forum but I have these 2 gas tanks that I got with a boat I picked up. One is 6g and the other is a 3g. Both have a little bit of rust in the bottom of the tanks. Is there a way to get rid of the rust an use them again. I hate to scrap them and buy new ones. The...
  14. P

    1975 mercury 200 hard to pull

    Oh, and I will be picking up a compression tester from autozone to check that as well. $40 deposit and then full money back when returned
  15. P

    1975 mercury 200 hard to pull

    It is a 20hp , I should of clarified that. I replaced the plugs already, old ones were a little black but not bad, after I replace the impeller this weekend, I will work the oil in. I did pick up a carb kit, but I want want to see how everything sounds before I go and start replacing things...
Top