Search results

Picked up a new project last night. 2019 Weldbilt 1756. Pictures to follow.

Sold the Tracker. Starting a new journey with a 2019 Weldbilt 1756.

Portable tank

Completed compression test 120 all four cylinders. Performed spark test, all four have spark. Bulb is pumping full through the line, fuel is pumping when motor is turned over. Removed carb bowls, plenty of fuel getting to the carbs. Carbs were rebuilt 2 months ago. Gas is only a couple of...

I have a 1985 Mercury 50 hp 2-stroke that will not start. I have replaced the stator, impeller, spark plugs, all fuel lines, fuel filter, and the carbs/fuel pump was rebuilt. The motor started and ran good in the driveway. Took it to the lake, started off the trailer. Went fishing and moved 3...

Lookin good. Can't wait to see the finished console.

Boat is done!! All that's left is the motor work. Cranked it today but it's not pumping water. It worked when I took it off the boat a year ago. Will probably have to change the impeller and rebuild the carbs. Just glad to be done with the boat and trailer.

Progress. The motor is back on.

. I used pink sheets from Home Depot. I used 2" thick for most of it, some 1" as I got close to the top.

I cut access panels on each side in my tracker. The foam was soaked with water and gas. I put in new foam and used angled aluminum for structure and riveted the cut out panels back in place.I also left space between the bottom of the boat and the foam to keep it dry in the future.

Still working on wiring. Installed the battery charger, battery trays, and batteries.made some connections, plenty more to go.

That's the plan right now. It came with a 50 HP Mercury.

Boat finally back on the trailer. Now it's time to get back on the boat.

Agree

All carpet installed on bunks and fender covers. Installed new hubs, that was an adventure. I bought hub kits from Northern Tool rather than buy the individual parts to rebuild my hubs, thought it would be easier. How wrong I was. The kits I bought were the only two they had that fit my axle...

Made a little progress today. Cut bunks, drilled holes and attached carriage bolts. Will remove and cover with carpet tomorrow. Started running conduit for wiring. Hopefully I will get the hubs and bearings installed tomorrow. How do you like my trailer supports? Buckets from the big 3, Home...

Disassembled the axle, hubs, leaf springs today. Bearings are totally shot. Stripped the paint from the axle and put two coats of primer on it.

Rod locker had two hinges, no piano hinge. I painted them black and used them on the new door. The new door is bigger than the old. I attached pics of the hinges and the old door. Also a shot of the plastic bins.

I didn't use any of the old bins and lids, threw them all away. They were cracked and broken. The rod locker lid is straight plywood, didn't use a template. It is actually longer than the old one. I used the old hinges and put it far enough away from the side to deal with the curve. For the...

Can't wait to see the finished product. Good luck!