Search results

Jumper cables WILL get hot running a trolling motor.. don’t do it... or... keep a good serviceable fire extinguisher handy!!

You could replace it with a new sealed piece of plywood and get another several years.. I’d replace it with a piece of aluminum and it’ll last the rest of the life of the boat.. I cut out a piece of aluminum and bonded it to mine with 3m 5200 to cover some old mounting holes..

Without more info, I say the motor needs to be raised..

Honestly, the plate sealed to the transom with the 5200 makes the epoxied holes pretty much a mute point.. I did it just for kicks I guess.. I really don’t remember what putty I used.. I built this transom about 2 years ago but never got to use this boat.. redoing the boat interior and...

I had more holes than I wanted in my transom from years of different motors/jackplate setups.. I cut out an aluminum plate bigger than my new jack plate and bolted it all solid using good sealant.. if I remember correctly, I sealed the holes with epoxy putty just to fill the voids..and then...

What’s the best system/method to route wiring? I usually just use zip ties.. the little clips never stay on and my trailer is box tube..

I think for the money, it’s hard to beat an all welded hull built in Arkansas.. pick a brand.. alweld, weld-craft, Southfork, Xpress and all about the same.. I do like the wareagles a lot.. but I think my next one is gonna be either a custom ordered alweld, or I’ll just have a custom hull...

I’m really super fanatical/anal about thinking ahead to NOT have problems on the water.. don’t skimp on fuel lines, primer bulbs, and the often overlooked connectors.. the cheap junk from Walmart is useless.. I’ve bought so many over the years and had problems that I’ll never not buy good...

I’m really super fanatical/anal about thinking ahead to NOT have problems on the water.. don’t skimp on fuel lines, primer bulbs, and the often overlooked connectors.. the cheap junk from Walmart is useless.. I’ve bought so many over the years and had problems that I’ll never not buy good...

What is this “old timers formula?”

What is this “old timers formula?”

That’s not float pods... that’s a fantail.. and it’s probably an alweld boat..

No breaker needed... Solenoid does the job...

I have a 14 foot Jon boat in my yard that's on its way to one of those yards... I had stripped it all out a few years ago... The crate with all the brackets and ribs and hardware I took off of it got lost.. So it's just a shell and has a few little corrosion spots.. Not really worth fooling...

It's overbuilt for a 30.... I designed it to reinforce the transom... I have backer plates to bolt to the inside.... I'll post pics when I get it bolted on... Doing some work on the motor and another few projects right now... But transom strength is why I decided to design my own... Other...

There's these Toho rig livewells....

If you're set on a permanent fixed livewell, check on YouTube... That fire ant guy seems to have a pretty good system with pump in/pump out and recirculate...

I think it's pretty hard to beat a good 50-70 quart cooler strapped in place.. Fill it with big gulp cup in the morning and aerate with a ready made all in 1 aerator with alligator clips... I've kept 5 alive no problem all day.. If it's summer time, have frozen water bottles in the drink...

You might can check in to the optima batteries... I know nothing about them but I seem to tender reading that tgey can be installed on their side(laying down)...

Are you measuring correctly? I'm pretty sure my group 29s are only 9 inches tall... I could be wrong.. I'll measure in the morning..