Search results

So I'm adding a 65gal live well to my 1756 roughneck and would rather not pull the floor to run a new live well fill hose and add another pump. I was planning on using a bilge pump with a hose attached to it and just put it over the side to fill the tank, but then got to thinking I might be able...

Any idea if two of the new style connectors will work on the fuel system? I don't have the 3prong connectors for the pressure tank system but thought that if I use two new ones it might work.

okay so I'm into my lower unit gear box now. What kind of sealant would you guys recommend on the spaghetti gasket? Also I want to replace my shift rod o-ring, but I'm not sure how to get the shift rod bushing out. I saw a guy on the internet tap the bushing then use a bolt and ply wood to...

Got a new project going! New gasket and seals along with impeller and carb kit. Any tips or recommendations are appreciated! This thing still has paint inside the heads!

It's a tracker

Is there any type of factory seal along the seams that would be disturbed by welding? I think I'll have the problem areas welded for now but down the road I might barrow a mig rig and just strip the inside and weld every seam on it or is that a bad idea?

Hey I hit a tree about 5 years ago with my tracker guide v16t. it put a dent in the aluminum along side the front kneel and a few others along the center seem. I've got away with putting caulking in the gap until a month ago. then I used JB marine weld and it worked for an hour then started...