Search results

other things I did to the boat were I replaced the bunks on the trailer and also made some guide on side bunks for it. I added a motorguide wireless 55 trolling motor to the bow that I traded a guy a transom mount trolling motor for even up. Now im waiting on some warmer weather to take the...

I made a windshield out of plexiglass that I got for free. the windshield folds down in the front so when I have the duck blind on it the windshield wont interfere with it.

I made some vertical rod holders to hold my trolling rods and also added a plier holder and a net holder

couple of the completed interior

depth finder, steering wheel and led interior light all installed

console was installed

the bow storage is big enough that I can store 2-20lb anchors and the rope for the bow when I launch the boat

gas tank is under the port side door and the starting and trolling motor battery are under the starboard side door

well I got it all done so here are the remaining pictures of the build/rebuild

The side hatches are actually custom....there was side hatches on the boat from the factory but the guy I bought it from took them out (he also had taken out the storage around the battery/gas tank area also)and I had absolutely nothing to work with besides a shelf and the wood that was around...

heres a before and after picture of the outside paint

my kids having fun checking out the progress

side hatches covered and installed

3 coats spare urethane on each side for the side panels and back bench area.

cutting and mocking up the side hatches.

took the boat over to my dads heated garage to glue in the nautolex on the sides, I used contact cement for this

got all the electrical ran and wires hidden behind the switch/control panel.

got the bow framed in also

its been a slow couple weeks for progress but its slowly coming along. I can actually see the end in sight. heres some pictures of my progress.

what you have seen so far is where i am at currently. i have to cut the wood and hatches for the area around the gas tank, and on the sides of the boat. when im done with that i have to rebuild the console and finish wiring the interior lights and depthfinder. Im not in much of a hurry to get it...