Search results

=D> =D> =D> Congratulations Guys =D> =D> =D>

Actually, fox are adapting to more developed areas as the coyote has displaced them throughout most of their range. More so with red fox, than grey fox. I do quite a bit of trapping in the fall and man those greys are fiesty little fellas. Great catch.

Not me brother. Of course, I'd have put a band-add over it and kept fishing, but give me the gas before pulling that thing out. OUCH :shock:

I've got two different colors of those too. Texas rig if fishing heavy cover. Drop shot or Carolina rig if fishing more open cover/bottom....hope you don't read this until after the tournament is over :D

268

What I did was made a grid on a piece of paper. First I measured the center line from the point of the bow to the ending point of the deck and marked this on my paper. Then I measured the width in 2" increments for the length and marked each measurement on my paper. After this was done, I...

Good Luck to All and Be Safe. Please Think of our Fallen Soldiers, Sailors, & Airmen while your out there on the water. Pray for those that continue to serve! Oh and Jim, BTW, the name on the plaque should read " K Y _ M A D M A N" :mrgreen:

Welcome to the site. I really can't answer your questions, except to say that you may be able to add one of those cooler-livewells. Some of the more experienced guys here will hopefully have some suggestions.

We coated the inside of our V-bottom while rebuilding it. So far, so good.

Man, that looks Great! Thanks for sharing the pics. Let us know how she does on the water.

Come on man, gotta see them pics =D> Welcome aboard...A really Great bunch of people here!

I like fireline smoke for fishing thick stuff and/or around alot of downed timber & rocks. I also use it in winter on my Float & Fly rig, with a Flouro leader attached.

Looking Good! Keep the pics coming =D>

I'd use the over-burner type too....but if you've got your heart set on a 12V coffee pot, you can find them at most truck stops for 30-40 bucks.

V-Bottom https://tinboats.net/forum/viewtopic.php?f=21&t=2329

Here's a link to my build https://tinboats.net/forum/viewtopic.php?f=3&t=2329 Posted it in the wrong area. Hey Jim, you wanna move it to this area? Anyway, Good Luck! Can't wait to see the photos.

Just thought that I would share some photos of my trolling motor mount. I left enough room on the deck to mount a factory bow type trolling motor mount when I get one. Anyway, here are the photos.

here's some pics Inside of brace and cross beam Cross Bracing Incidently, I measured the open space between the decks, in the middle of the boat and it is 4.5 ft. From back to front - I used the 1st, 3rd, & 4th benches and eliminated the 2nd. So the distance between the 1st & 3rd seat is ~4...

I have two of those side braces that I took off during my V-Hull build. If you need them, I will send them to you. Take some pieces of aluminum angle iron, bolt to the sides where the seat mounts were, and then run angle iron across the width of the boat, then brace it to one of the...

Sounds like a short of some kind. Check grounds and then check hots. I found a short that was where the plastic was rubbed off of a hot wire. When the wire touched an aluminum brace it would short circuit my system. Let us know how it goes.