Search results

Yes it is a V4. dual power packs, after replacing the power pack I think was bad, now I don't have spark on either cylinder connected to that power pack. I do not know if there was spark there before I changed the power pack. That's why I was wondering if each power pack, is powered...

Thank you for the info. Is there any case where it would allow one power pack to deliver spark to cylinders 1 and 2 and the other power pack to not give spark to cylinders 3 and 4? Like one power pack does not receive power but the other does?

I put in a new power pack on my 1987 88hp Johnson because I was having some misfires at mid to high rpms. Now i don't have spark on cylinders 3 and 4. I was pretty sure the original power pack was the problem because there was rip in the coil fitting boot and I could see the terminal. If one...

So I tried again with no luck. After removing the set screw on the twist grip, it still feels like it is very securely attached to the tiller arm somehow and not by just wires.

Thank you, I will try this out!

I have looked at this schematic but still doesn't show how to actually remove the twist grip. I have gotten to the point where the set screw has been removed but I am stuck there. I do not want to damage any linkage by pulling too hard and nothing is budging.

Hi guys, I was hoping someone could help me out with trying to get the twist grip off to replace the stop switch. I pried the rubber handle off and removed the set screw but I don't want to tug too hard on anything before knowing what needs to be done. The twist grip has to come off somehow.

Great, thanks! You guys have given me relief on this subject.

Thanks! I did read one article that said that the solenoid was acting as a sort of breaker, but I wanted to be safe anyway. I really appreciate the info!

Can anyone advise me on how big of a circuit breaker I need for my 1986 25hp Mercury. I bought it used with a 50amp breaker on the battery but it seems to break an awful lot when I start when it is not warm yet and it takes a few seconds to start. I cannot find anything on a size breaker for...

IN