Search results

Does anybody have a resource for a flexible fuel filler hose for my 97 tracker tournament v17 ? I need something flexible because from filler hole to tank it has to bend twice and seems to collapses normal fuel filler hose.

I choose Tuff Coat because I got tired of hooking the carpet every time I am in a carpeted boat. The vinyl route would have been my second choice, the Tuff Coat being first because to makes the wood totally water proof and you can always continue to add coats over it in the future without any...

The important thing is to prep. I did all wood and aluminum seating and hatches. The key when applying it after the primer of course, is to cross hatch to make sure and the rubber material even. Also, make sure the first coat drys before trying a second or it will lift the first coat.

Thanks.I waiting for the weather to get nice to put it all in the boat. Then it will get the third coat and call it good.

Restoring a 1997 Tracker Tournament v17. Using Tuff Coat which is coming out great,

I am trying to order some new screws online for the new decking on my boat. Not sure of the size # ? Thanks

Thanks for the ideas. I am loving this tuff coat stuff

So I have ripped out and replaced all wood in my tracker v17 . I am now Tuff Coating because I get tire of pulling hooks out of carpet. The question is would it be best to screw down deck then coat over the screws? Or Coat it then screw it down leaving head of screw exposed? The hole I make will...

The hole in my transom for the livewell is 1 inch. All the livewell pumps have a 3/4 inch intake . If I run a 3/4 inch it seems to me it has a better change to leak. Will a 3/4 inch work with proper 3m 4200 around it? Found a 800 gpm livewell pump with 1 inch inlet. All is good.

I used poster board. It is stiff enough to to lay flat yet easy enough to cut

Thank you

Well still restoring this 1997 Tracker Tournament v17. I am bolting up the new transom. On the transom the drain and the livewell bilge hole are 1 inch. Then the far left hole is the livewell drain which is below waterline. All the drains I can find say right on the description " not recommended...

In regards of coating it. I am working on a Tracker v17 and used Coat It. The stuff is amazing not only waterproofs it but also strengthens the wood . https://www.amazon.com/Amazing-GOOP-5400040-Waterproof-Protector/dp/B083ZDYPDJ I coated the underside of all the wood in my boat and transom...

Good Idea.

Well I will have access until I screw the deck in :) I have though about that.

I bought the one pictured and I am using it for my boat now. Works great

I am rebuilding a 98 Tracker v17 STILL.:) I am putting new pedestals on. This is going into 3/4 inch. Is there a need to put some sort of backing plate to secure the bolts through the plate? Or will going into the pronged t nuts be fine alone? Thanks

I am trying to update my controls from the 3000 that came with the boat to the 4000 model . I know I have to use gen 2 cables but what about the electrical ?

I go back through these pics from time to time for motivation . I bought a 98 Tracker v17 in Dec of this year while out on medical leave. In January while using a walker I was able to tear it apart. Then I starred at it because I couldnt do much more in my condition. I was released in March...

I am currently restoring a 98 v17 and using tuff coat. I have torn the boat down and just cut a new transom for it. Not a hard job but in the V17 you have to cut the corners after taking off the cap to pull the old one out. Now that it is cooling off I will be putting more time into it.