Search results

Does anybody have a resource for a flexible fuel filler hose for my 97 tracker tournament v17 ? I need something flexible because from filler hole to tank it has to bend twice and seems to collapses normal fuel filler hose.

Restoring a 1997 Tracker Tournament v17. Using Tuff Coat which is coming out great,

I am trying to order some new screws online for the new decking on my boat. Not sure of the size # ? Thanks

So I have ripped out and replaced all wood in my tracker v17 . I am now Tuff Coating because I get tire of pulling hooks out of carpet. The question is would it be best to screw down deck then coat over the screws? Or Coat it then screw it down leaving head of screw exposed? The hole I make will...

The hole in my transom for the livewell is 1 inch. All the livewell pumps have a 3/4 inch intake . If I run a 3/4 inch it seems to me it has a better change to leak. Will a 3/4 inch work with proper 3m 4200 around it? Found a 800 gpm livewell pump with 1 inch inlet. All is good.

Well still restoring this 1997 Tracker Tournament v17. I am bolting up the new transom. On the transom the drain and the livewell bilge hole are 1 inch. Then the far left hole is the livewell drain which is below waterline. All the drains I can find say right on the description " not recommended...

I am rebuilding a 98 Tracker v17 STILL.:) I am putting new pedestals on. This is going into 3/4 inch. Is there a need to put some sort of backing plate to secure the bolts through the plate? Or will going into the pronged t nuts be fine alone? Thanks

I am trying to update my controls from the 3000 that came with the boat to the 4000 model . I know I have to use gen 2 cables but what about the electrical ?

Hey everyone, I am not sure if this has been shared or not. I am in the middle of a 98 tracker restoration. I just ripped out the transom and put in a new one. I painted it with this product called "coat it" the stuff is amazing. I am also going to be coating my decking and flooring with it...

I was hoping when I pout new foam in the rear of my tracker to keep the foam off the transom wall. The reason for this is to be able to reach all the nuts, bolts and screws that go through the transom and into the braces in case I ever need to replace them I wont have to cut out foam to do so...

I have sanded, wire brushed and wiped down the transom area of my tracker. I am Going over the pitting and small pin holes with JB weld wet . Now I need to paint it inside and out. I came across this product at home depot. It says the zinc in it slows the corrosion process. Is this a good...

Hello, I am new here and want to say thanks for all they great information i have found using the search function :) I bought a used 98 98 Tracker v17 tournament with a Mercury bigfoot 60 on it. I was going to just replace the flooring and carpet. Unlike most things I do I have the need to...