Search results

Aluminum welding shops are few and far between and ones that will weld on a boat are even more rare. You are already paying rent/mortgage on a shop......might as well get the most money you can out of it! Plus im sure your wife would love to not walk into a garage full of welding fumes lol

yes it will be bent....a lot! im thinking 5052 might be the better alloy

looking good buddy!

kinda what I was thinking. we use 5052 to make our class 8 fuel tanks here at work so I figured 5052 would weld just fine

Outside corner welds are a little more difficult. Get yourself a backer bar/plate made out of copper. a 2"wx6"Lx 1/2" thick bar works best and cut a 45 on one end. your welds especially butt welds will improve tremendously! Im also flat out shocked that you are getting any of that wire to feed...

My best friend has a 1999 4x4 Tacoma 4cyl and pulls a 18ft cc tracker for about the last 15yrs. The boat is worth the 2k in my opinion.

what would yall recommend to patch a jon boat hull? is there a huge advantage of using 6061 over 5052? all repairs will be welded fyi

how is your boat wired? do you have a pos and neg that feeds a fuse panel and all accessories run from that? if so just put in a simple switch before the panel on the positive wire. it would have to be a big enough switch to carry all the amps that all of your accessories use...like maybe a 40A...

I have the Garmin striker4 and absolutely love it. I think the 7 is the same just a bigger screen. the chirp sonar lets me see things that I've never seen before and the ease of use is awesome

cedar I don't know how to post pics.....but I will look it up

I'm in north Texas and the sand bass and crappie run up the creeks is just around the corner for us. The hull I have is a 14ft 42" v-bow boat, it is weird shaped to say the least! It is shaped like a piroge....completely flat bottom with about a 2" rise from the bottom of the transom to the...

update 1/9/18 engine is back together and by the grace of sweet baby Jesus this thing somehow cranked...and ran...and idled after about 30 sec of cranking. motor fires right up with just a bump of the starter now! I also picked up 2 14ft jon boats and a trailer for 100$. I need to figure out...

cedar got to it before I did......110 amps isn't enough even 150amps is definitely on the lower end as far as amperage needed to weld aluminum. Also remember that aluminum has to be ridiculously clean to weld properly. if you are going to be running any long beads don't grind and clean any more...

welcome to the forum! If this were my project before I did any type of metal work I would start by moving weight around. Like moving the battery and fuel tank to the front. You don't have to make anything remotely permanent in the trial process....just use a ratchet strap to tie things down to...

That prop looks just fine!! might want to bend that one dog ear out with a crescent wrench but a new prop will cost at least 150$. if you don't run in timber or rocks go with a stainless prop and keep that aluminum one as a spare in the boat for an emergency. get some stabil and seafoam in the...

welcome to the forum. 2 months ago I was in the same phase as you are. I think I watched every YouTube video that came up when I searched "jetjon". I spoke with a guy I work with who has done jetski/fourwheeler repair for 20+ yrs and the one thing he said was STAY AWAY FROM ANYTHING TIGERSHARK...

or buy a Kawasaki and cuss the carbs lol I think I will plumb in a ball valve or check valve of some kind

two pumps..... two motors..... two ecu....... for 775$ man id jump on that like a fat kid on cake!!

Has anyone had an issue with their exhaust filling up with water while using the trolling motor on a jet jon? The reason that I ask is.....one of my friends at work bought a jet ski and was working on getting some of the "storage gremlins" worked out. The ski died in the middle of the lake and...

thanks cedar!! and all gaskets and seals will be replaced. I will also do a pressure and vacuum test before power ever touches the starter! I think I would rather spend the extra $$$ on an SBT kit VS something off of Ebay And Andy most PWC engines have 2 crank case halves....an upper and a...