Search results

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Tracker V16 motor height

    Hey all, I picked up a very used 2004 Tracker pro guide v16 WT with a merc 40hp 4 stroke 3 cylinder EFI. Not that I was expecting to win any races, but this thing is a dog. Can barely hit 20mph in perfect conditions. Anyone have a similar setup who can throw some knowledge my way? It gets to...
  2. B

    1990 Evinrude 25hp poor/no spark (UFI to CDI conversion)

    My E25TEESB has suddenly stopped sparking on both coils. I believe this year motor has an Under Flywheel Ignition setup which Evinrude only had for a few years. I have my spark gap tester hooked up without plugs in. Sometimes on the first crank I'll see one faint spark jump across, but usually...
  3. B

    1991 Evinrude 25hp....low RPMs?

    My outboard seems like it's running good, but my tach is telling a different story. Does a 15' welded gregor semi-v tin loaded with 850ish lbs of people and stuff doing 24mph (fishfinder GPS) @ 2800 RPM sound right at all? Idle is around 600-700 according to the tach. No hiccups at WOT. The...
  4. B

    To prop or not to prop (or motor)

    Hello, all. I've been doing some research but wanted to get some possibly updated thoughts/advice from you guys. I have a welded 15' Gregor semi-V with a 70's Johnson 15hp 2-stroke tiller. Rebuilt & reinforced transom. The boat is loaded down pretty well with gear and 70 lbs in decking, big...
  5. B

    Transom HP rating question #7442

    Hello everyone. I'm rebuilding the transom on my 15' Welded Gregor H-51. The transom that was in it has the factory specs on it, where there are two ratings. One for max horsepower of 15, the one below it says 7 max hp. That can't be right, can it? That's not saying 15 is the max for center...
Top