Search results

The turkey baster did not work. This stuff was really thick today but the temp was around 55 degrees. Made a nice mess but the bottom is painted. Used 3/4 of a gallon on the bottom should have enough to do one side in the spring. Thanks for all your help Damifinow Fish

yes I was planing to using 2 turkey basters and do it the way you said. I want to use 16oz at a time to see how it goes. How long should I plan to just do the bottom of a 13 foot boat? Thanks damifinow fish

So I 'm getting back to my boat project. I have to do this job by myself so I know I need to mix up small amounts. My question is Are the 2 different parts too thick to use a turkey basters as a measuring cup? Damifinow Fish

Hi I'm getting back to the boat project and was looking at the fasco epoxy web site. What was the name of the epoxy that was inexpensive that you could get in the color you wanted? I'm looking for a tan color. Do they have a color chart? I did not see it on the web site. Thanks Damifinow Fish

this dial up is got to go can't get these to come out right Sorry Damifinow fish

sorry these pictures are not coming up right on my computer

opps try these larger pictures Damifinow fish

Look at the new use of jon boats. Taking little kids to school and walking the dog. These are pictures of my little nephew going to school in a jon boat. His neighbor then using the jon boat to get her dog to dry land so the dog could do what dogs do This is some were in New Hampshire this...

RV vandalism and bad rv repairs ________________________________________ I just want to make people aware that when you rig needs insurance work DO NOT take it to the closest Rv dealer. Take it to the repair shop the insurance company recommends. My lance truck camper need a new back door do...

I'm using the pink foam and spray can on my project. hd pink foam was about 15bucks and the can was about 4bucks. I'm filling the open space as much as I can with the pink and then spraying in to tighten everything and fill the voids. I'm on my fourth can and have more to cavities to fill...

I don't think removing the foam is going to help balance the boat. I just relocated my foam and the big 8x8x12 block weight nothing. the wind even blow it out of the boat. Can you move your seat back an inch or two? I have the same problem but in the stern. just my opinion Damifinow fish

google durabak they have pictures of marine applications. they will also send you a small sample of your choice of colors. hope that helps Damifinow fish

The plastic bins are permanent. I wanted something that could hold the shape when the foam was sprayed in. This should also keep the water out from soaking up from the bottom. The bins are from Ikea. They were about 1/4 inch too high but they have a nice lip to get them tight to the underside of...

The boat only had one storage compartment. With this set up I've gained a lot more storage. 4 just in the bow. And I think I'll end up with even more flotation foam then the boat started with It be a few weeks before the next steps get posted Fishing season is here Tight lines Damifinow Fish

The under side of the bow deck will be used for an anchor locker. The inside will be coated with cheap bed liner The out side will get the durabak coating when everything is finished. So for now it will just get a coat of water proofing. I'm thinking about using fiber glass resin. it's going...

The bow deck is about 1/4 diamond plate. the edge was finished with a piece of 1 inch square tubing under to give it strength. then to give it a nice smooth edge a piece of 1 inch angle was used to cap it. All out of aluminum

Well the camera did not want to talk to the computer. All is working so here are the new pictures. The section with two boxes is not done because the lower floor will but up into this area so I will foam it out when the new is in. the OSB is just a temp floor to get all the holes cut just...

Was able to cut supports for the bow seat. Supports for the new hatches were cut also. All new wood are getting lots of coats of water seal. Started to fix the water leaks when I came across this. It seams to be eating away the aluminum from the inside. Lots of foam under floor. Have not pulled...

Got some more hours on this project. Rough cut the aluminum bow deck. broke a 7 1/4 in saw blade cutting 1/4 plywood for a template.

You can always rent one (canoe) before you buy one. Some canoes out there are more stable then others. Try to rent the one you think you might like to buy. I can't believe this but I'm looking at a 12 foot canoe. I wanted a sea kayak but then the dog could not go with me. Damifinow Fish