Search results

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. 1648grizz

    Springs

    Hello all, So my leaf springs are done, I have a 2006 Long trailer made in NC. The Co went out of business and I cannot find the same spring. After some research I found that they made there own springs custom for their trailers. I have a 16' Grizzly with a 25hp motor, I'm guessing my total...
  2. 1648grizz

    Stuck prop

    Have a 1992 70 HP Force that has been sitting 15 years. It was a free boat and it runs great. The prop shaft has a slight wobble and was trying to remove prop so I can straighten shaft and identify prop pitch. Man it's stuck bad. I tried to make a puller with a pitman arm puller and some chain...
  3. 1648grizz

    Prop ?

    I have a 1992 Force 70 HP and want to know what prop is on it. The number on the side is (DM 21824) I did a search on this number with no results.
  4. 1648grizz

    Force 70 HP 1992

    Got a free boat,17' Capri on a galvanized trailer with a 70 Force outboard. Took carb off and cleaned, that it didn't need, hooked it up to a fresh gas can and it started right up. The boat has been sitting for 15 years and it runs great and pumps water. Anyone here have a 70HP Force ? Are...
  5. 1648grizz

    Flotation foam 2005 1648 Grizzly

    The water would not drain under my rear bench seat when I bought it in 2005. I had to take a steel rod and clear the foam out of the channels so water would drain out. I want to put a storage hatch in the bench and I'm thinking maybe I should remove all foam because it may be waterlogged. Did...
  6. 1648grizz

    2005 25HP johnson prop nut torque ?

    Been searching around for the torque spec for the prop nut on my 2005 25HP Johnson 2 stroke. some say 10lbs others say 55lbs .
  7. 1648grizz

    Astrophotography

    Anyone here into this hobby, as a beginner here are a few with my DSLR
  8. 1648grizz

    Sunset over Black Water Refuge

  9. 1648grizz

    Throttle cam

    Would anyone know what the difference might be between the throttle cam on a 25HP Johnson and a 30HP Johnson ? I just put a 30HP carb on my 25HP Johnson . I did read a post that said you also need to change the cam , they look identical but different part # . Maybe the timing notch ? Thanks
  10. 1648grizz

    Prop 25HP johnson 2 stroke ?

    Just replaced my prop, never had it off in 14 years the nut was loose. should it be tight ?
  11. 1648grizz

    30HP 2 stroke Johnson prop ?

    Was there a standard prop that came with this engine new ? Would a 10x15 work ok on 1648 with light load ? Thanks Bill
Top