Search results

Dave: There is zero grease on the inner wheel/hub/grease seal...I imagine it is simply filling the void around the spindle inside the hub.... All: I did the 145mi drive, no issues....now the boat is down in Phoenix, where I am moving in a couple weeks....

UPDATE: I today tackled my hub re-build.... Removed both hubs, removed grease seal, bearings and outer races....threw the seal, bearings & races away. Pressed/tapped in new races, packed new bearings, assembled with new grease seal and cotter key.... Re-Assembled, re-installed the bearing...

Thx guys... Yeah, I know the real answer...just wanted to feel out some answers and if I am doing overkill... I ordered up some new bearings and races....gonna 'overhaul' the hubs w/new races, bearings, seal, etc....no sense in the aggravation of a breakdown to save $20 and an hour or so...

So, I inspected my bearings, they are in great shape...reassembled....and now when I spin/turn the hub, hear a 'rolling' noise...almost a rumble....thoughts? Also, the old grease was very thin, and dark greay.....thoughts?

THX for the validation...easy enough to inspect.... If they are good, didn't waste much time... If they are bad...THANK GOD I checked... Either way is a win!

Hey Gang, I have bearing buddies on my trailer from previous owner, and when I jack trailer, the tire/wheel spins free and smooth, zero side to side or up and down freeplay.... Should I pull the bearings, or just ensure they have grease from time to time w/bearing buddys.... I am a 'if it...

Love mine....a Humminbird Pirahnamax170....I know the inlets and such on my lake by heart, but have found alot of structure and vegetation well offshore, I would never have known about.... And always fun & 'gee whiz' to see depth and surface temps...

Running my little 12' Mirrocraft.....Johnson Seahorse 6hp (1974)....my home lake is at about 7000' above sea level....engine runs strong...

As mentioned above, I leave the rear seat off, so I can adjust as needed, sometimes sitting facing starboard/front, and sometimes facing port/front.....but generally, I sit in center.... The tiller on most engines, is on the port side AND angles slightly to the port side, so 2' back (say where...

Yup, last weekend on Lk Pleasant....30mi NW of Phoenix....

In picture #1, that is a thrust plate, often original, sometimes added on, or beefed up. It is like a 'scuff pad', and adds protection and reinforcement. The thrust of the motor pushes on that sheet, also, think of the top of the transom as a 'pivot point' when the motor is mounted, this...

Local guy put a seadoo engine/drive in his little tinny: https://www.youtube.com/watch?v=Vv7Dy4ePD90

I let ALL my engines warm up....no matter if it is a car, boat or airplane.... Engines have dissimilar metals, expand at different rates, etc... But really, what does it hurt to sit at idle for a min or two, while you are getting the fishing rods rigged, turning on the graph, etc.... After a...

Here is my headgasket replacement.... I knew/found I had a bad headgasket, when the engine was hard to start, would not idle smoothly, I pulled the top plug...it looked good... I pulled the bottom plug...and the cavity between the electrode and threads was full of clear, clean water! Now...

So what did you change: More/less pitch two or three blade? Or was the old prop just tired enough that a new one got you more speed?

THX Cajun.... I took her out today, put alot of use on the motor....runs great! And to clarify, the $115 is for the whole project, including the motor!! Motor...........................$75 Fuel Pump rebuild kit.....$11 Carb overhaul kit..........$14 Head Gasket.................$15 I guess I...

Hey Gang, I have the service manual for my motor, but am looking for the owners manual.....anyone have one scanned in or a link to one online....just want to see what they told the consumer who bought one back in the day.... THX 1974 Johnson Seahorse 6hp

Hey Gang I picked up a 1974 Johnson Seahorse 6hp, the previous owner said it ran ok last season, but this season he could not get it to start...I quized him on what he did to try to get it running, he said "Nothing", I just want to get rid of it. Paid $75 for it, clean engine. All original...

Yup, sounds like fuel pump....ask me....I know. I just rebuilt the fuel pump on my 6hp Johnson (1974), with a kit I got from Amazon (Sierra).....$12 or so...a new pump is about $75.....rebuild was easy with the instructions from the below webpage...

Hey Fish' Did you verify you have spark from both plugz......if so, you have fire.... Did you verify you have air....if you are breathing good to go....(not being flip, it is troubleshooting 101) So, if you have those, all you need is metered fuel....carb....check for leaks (air and fuel)...