TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
1976 Evinrude 35HP - Help!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="marlin3030" data-source="post: 346027" data-attributes="member: 13659"><p>ok guys i need some help here. got the carb cleaned and mounted. getting good spark and fuel. it's trying to turn over but it's almost like there is a timing issue and it's not firing at the right time. it backfires like crazy from the exhaust almost like the sound of popcorn but it won't turn over. Points and condensers are good and set at .020. compression is real good, but when you pull the plugs after trying to get it to start the plugs are covered in black gas. Any advice would be appreciated. </p><p></p><p>Here's everything i've done... </p><p>Cleaned all jets and replaced gaskets on carb</p><p>new plugs</p><p>compression is 120 and 125</p><p>set points to .020 and cleaned them</p><p>replaced all worn wires</p></blockquote><p></p>
[QUOTE="marlin3030, post: 346027, member: 13659"] ok guys i need some help here. got the carb cleaned and mounted. getting good spark and fuel. it's trying to turn over but it's almost like there is a timing issue and it's not firing at the right time. it backfires like crazy from the exhaust almost like the sound of popcorn but it won't turn over. Points and condensers are good and set at .020. compression is real good, but when you pull the plugs after trying to get it to start the plugs are covered in black gas. Any advice would be appreciated. Here's everything i've done... Cleaned all jets and replaced gaskets on carb new plugs compression is 120 and 125 set points to .020 and cleaned them replaced all worn wires [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
1976 Evinrude 35HP - Help!
Top