Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="perchjerker" data-source="post: 408655" data-attributes="member: 20605">I would not remove the ball plugs. They are installed during manufacturing to plug up holes in the carb body from drilling the passages as the drill must have a place to enter the casting in order to machine the passage. they are not designed to be removed.I would soak the carb body in a tank of carb soak cleaner designed for the that purpose then use a piece of tag wire to clean all the passages followed by compressed air. Verify all the passages are clean You should be able to find this at a well stocked auto parts store.</blockquote>