TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
1987 Bass Tracker V16 SC Guide Special Rebuild
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="shmelty" data-source="post: 262093" data-attributes="member: 6454"><p>For the curved deck up front i kind of lucked out. The old desk was completely rotten on the left side but the right side was in okay shape. I measured the original and cut it exactly in half then traced that half on a new piece of wood, flipped it over and traced the other side. When I cut out the deck I used a jigsaw and set the blade at an angle so the edges would fit the contour of the boat.</p><p></p><p>The hatches I got at Amazon.com https://www.amazon.com/Tempress-White-Hatch-without-23-25/dp/B00144CTWS/ref=sr_1_1?ie=UTF8&qid=1336565812&sr=8-1</p><p></p><p>The PVC Board I got at Home Depot.</p><p></p><p>As for sealing the wood... I really went overboard and did 2 coats of West Systems Epoxy <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile :)" loading="lazy" data-shortname=":)" /></p></blockquote><p></p>
[QUOTE="shmelty, post: 262093, member: 6454"] For the curved deck up front i kind of lucked out. The old desk was completely rotten on the left side but the right side was in okay shape. I measured the original and cut it exactly in half then traced that half on a new piece of wood, flipped it over and traced the other side. When I cut out the deck I used a jigsaw and set the blade at an angle so the edges would fit the contour of the boat. The hatches I got at Amazon.com https://www.amazon.com/Tempress-White-Hatch-without-23-25/dp/B00144CTWS/ref=sr_1_1?ie=UTF8&qid=1336565812&sr=8-1 The PVC Board I got at Home Depot. As for sealing the wood... I really went overboard and did 2 coats of West Systems Epoxy :) [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
1987 Bass Tracker V16 SC Guide Special Rebuild
Top