TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
CHANGE DUAL CONTROLS TO SINGLE
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="JOHNSON44" data-source="post: 167290" data-attributes="member: 4194"><p>The two 48HP Johnsons on my 18X60 Duracraft were connected to two sets of controls, one to each motor. They were apparently bolted together with a connecting plate. I am only putting one of the 48s back on the boat as it is rated to a 50. It looks as if I can just unbolt the two halves and have one single set of controls. I will have to create some sort of cover when I get that far. Second issue is that the controls were in a vertical position with the control handles sticking straight up and the cables going straight down in a standup console. I want a conventional setup with the control handlels veritcal and the cables running horizontally back to the motor. Any demons hidden here I should be aware of?</p></blockquote><p></p>
[QUOTE="JOHNSON44, post: 167290, member: 4194"] The two 48HP Johnsons on my 18X60 Duracraft were connected to two sets of controls, one to each motor. They were apparently bolted together with a connecting plate. I am only putting one of the 48s back on the boat as it is rated to a 50. It looks as if I can just unbolt the two halves and have one single set of controls. I will have to create some sort of cover when I get that far. Second issue is that the controls were in a vertical position with the control handles sticking straight up and the cables going straight down in a standup console. I want a conventional setup with the control handlels veritcal and the cables running horizontally back to the motor. Any demons hidden here I should be aware of? [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
CHANGE DUAL CONTROLS TO SINGLE
Top