Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="dhoganjr" data-source="post: 414862" data-attributes="member: 12925">If that last pic was where it was set at it was too low. 1 hole up should be close. I was thinking true flat bottom, a semi-v needs to be a bit lower than even with the pin due to the v. Before water was going over the lip, you can easily lose 3-4 mph with them that low.You should notice an improvement when you get your other issue figured out.</blockquote>