TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
How to mount pedestal base in wooden floor??
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Dman23" data-source="post: 257314" data-attributes="member: 8226"><p>I used 1/2 inch plywood for mine. Under that i made enough 2x4 framing to make the floor generally solid as can be. Then i took two layers of 3/4 inch by about square foot pieces and screwed that under where the bases were going. Then i drilled out holes and beveled them to just the right side that the bases required to fit flush with the floor. </p><p></p><p>With the 2x4 supports in the floor and especially the two thicknesses of 3/4 plywood under where the bases go, it is solid as can be. Should have taken better pics of it but you can sorta see how i disdmy floor in these pictures of my brother spray foaming it. Especially in the one picture you can see three bases for the pedestal bases. One on one side of the middle support and two on the other. </p><p></p><p>I will tell you the bases are stronger than the pedestal. Period.</p></blockquote><p></p>
[QUOTE="Dman23, post: 257314, member: 8226"] I used 1/2 inch plywood for mine. Under that i made enough 2x4 framing to make the floor generally solid as can be. Then i took two layers of 3/4 inch by about square foot pieces and screwed that under where the bases were going. Then i drilled out holes and beveled them to just the right side that the bases required to fit flush with the floor. With the 2x4 supports in the floor and especially the two thicknesses of 3/4 plywood under where the bases go, it is solid as can be. Should have taken better pics of it but you can sorta see how i disdmy floor in these pictures of my brother spray foaming it. Especially in the one picture you can see three bases for the pedestal bases. One on one side of the middle support and two on the other. I will tell you the bases are stronger than the pedestal. Period. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
How to mount pedestal base in wooden floor??
Top