TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Lowe bottom repair
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="essess" data-source="post: 182071" data-attributes="member: 4720"><p>Thanks for the help. I have tried this ----- I got 1"X8' angle aluminum at Lowes along with aluminum tape. I put some of the tape on the inside. I then filled in the gap in the strake with 3M 5200 from the outside. After the 5200 cured, I then ran a bead of the 5200 down the top of the strake, did the same on each inside edge of the angle aluminum, placed it over the strake, then secured it every 4" or so with screws. I filled in each end of the angle aluminum with 5200. I have yet been able to take it to the lake to see if it is going to work, but I'm hoping so.</p></blockquote><p></p>
[QUOTE="essess, post: 182071, member: 4720"] Thanks for the help. I have tried this ----- I got 1"X8' angle aluminum at Lowes along with aluminum tape. I put some of the tape on the inside. I then filled in the gap in the strake with 3M 5200 from the outside. After the 5200 cured, I then ran a bead of the 5200 down the top of the strake, did the same on each inside edge of the angle aluminum, placed it over the strake, then secured it every 4" or so with screws. I filled in each end of the angle aluminum with 5200. I have yet been able to take it to the lake to see if it is going to work, but I'm hoping so. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Lowe bottom repair
Top