TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Electrical
Minn Kota Terrova 80 with ipilot link
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="TNtroller" data-source="post: 384598" data-attributes="member: 4251"><p>Hopefully you have access to the underside of the bow area where it will be mounted, if not, might consider making access with a hatch cover install. It should mount like other TM's except for the fact these models MUST extend out over/past the leading edge of the hull by a couple inches. It looks weird and is weird, but they work, I had to have 1" of clearance between the TM shaft when deployed and the leading edge of the PT175 I mounted a 55#'r on which meant 3-4" of base hanging off the front of the boat. My 175 had plywood under the tin up front and I had a small cover I could remove for the bolts/nylok nuts I used. I did not use a MK mounting plate, you might or should consider using one, it could make it easier and better in the long run. GL</p></blockquote><p></p>
[QUOTE="TNtroller, post: 384598, member: 4251"] Hopefully you have access to the underside of the bow area where it will be mounted, if not, might consider making access with a hatch cover install. It should mount like other TM's except for the fact these models MUST extend out over/past the leading edge of the hull by a couple inches. It looks weird and is weird, but they work, I had to have 1" of clearance between the TM shaft when deployed and the leading edge of the PT175 I mounted a 55#'r on which meant 3-4" of base hanging off the front of the boat. My 175 had plywood under the tin up front and I had a small cover I could remove for the bolts/nylok nuts I used. I did not use a MK mounting plate, you might or should consider using one, it could make it easier and better in the long run. GL [/QUOTE]
Verification
Post reply
Forums
Boats
Electrical
Minn Kota Terrova 80 with ipilot link
Top