TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Need some advise on my 6hp johnson
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Pappy" data-source="post: 384556" data-attributes="member: 3278"><p>Pin location should be all the way against the transom on your set up. </p><p>You have a bunch of extra weight in your hull compared to the other videos you compare against. </p><p>Move weight forward and try your speed runs again. You are still running bow high...gotta get that bow down and fully on plane.</p><p></p><p>On the carb look at the throttle shaft that passes horizontally through the carburetor. Looking at the left or stbd side of the carb you will see a roll pin that goes through the throttle shaft. That pin, at WOT, should be close to vertical. If you have a worn or grooved throttle roller you may not be opening the carb fully.</p></blockquote><p></p>
[QUOTE="Pappy, post: 384556, member: 3278"] Pin location should be all the way against the transom on your set up. You have a bunch of extra weight in your hull compared to the other videos you compare against. Move weight forward and try your speed runs again. You are still running bow high...gotta get that bow down and fully on plane. On the carb look at the throttle shaft that passes horizontally through the carburetor. Looking at the left or stbd side of the carb you will see a roll pin that goes through the throttle shaft. That pin, at WOT, should be close to vertical. If you have a worn or grooved throttle roller you may not be opening the carb fully. [/QUOTE]
Verification
Post reply
Forums
Boats
Motors
Need some advise on my 6hp johnson
Top