TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Small Paint blisters growing under high end factory paint,
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="BillPlayfoot" data-source="post: 444743" data-attributes="member: 22157"><p>I used my 6 inch orbital sander with 80 grit and followed over that with 120 grit to dull the sanding marks</p><p>Then I sprayed two coats of epoxy primer over the bare aluminum</p><p>I used PPG Delfleet Essential factory pack white polyurethane paint for the top coat. I sprayed two coats. This is for the hull.</p><p>I used Matrix base coat and Limco clearcoat for the deck.</p><p>I use stainless steel hardware.</p><p>Not sure what you are asking regarding a barrier between the boat and the hardware. I'm just going to bolt the hardware back on same as the factory did.</p></blockquote><p></p>
[QUOTE="BillPlayfoot, post: 444743, member: 22157"] I used my 6 inch orbital sander with 80 grit and followed over that with 120 grit to dull the sanding marks Then I sprayed two coats of epoxy primer over the bare aluminum I used PPG Delfleet Essential factory pack white polyurethane paint for the top coat. I sprayed two coats. This is for the hull. I used Matrix base coat and Limco clearcoat for the deck. I use stainless steel hardware. Not sure what you are asking regarding a barrier between the boat and the hardware. I'm just going to bolt the hardware back on same as the factory did. [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Small Paint blisters growing under high end factory paint,
Top