TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
Tracker Tournament TX Rebuild
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Bobsbaits" data-source="post: 335533" data-attributes="member: 12589"><p>Ok, here's what I got done today. Finshed the primer and got 2 coats of color on. Needs another coat and then some clear, but I ran out of paint. Really misjudged that. I also made some new boards for the trailer as I saw the originals were rotten when I took the boat off. I figured since I had some SPAR left I would go ahead and coat them before I put new carpet on. I also put some fresh paint on my motor bar. I had this custom made for my jet. Probably don't ned one with the jet, but I hate to see the motor stress the transom. Going to the store first thing in the am to get some paint so I can get it done and let it sit for a couple days. I also made a plate for the cable hole. I don't know why Tracker made this so big and oblonged but water often went in here. I made a plate and plan to put two cable boots to keep the water out. One is for the motor cables and the other is for transducers and speedo.</p></blockquote><p></p>
[QUOTE="Bobsbaits, post: 335533, member: 12589"] Ok, here's what I got done today. Finshed the primer and got 2 coats of color on. Needs another coat and then some clear, but I ran out of paint. Really misjudged that. I also made some new boards for the trailer as I saw the originals were rotten when I took the boat off. I figured since I had some SPAR left I would go ahead and coat them before I put new carpet on. I also put some fresh paint on my motor bar. I had this custom made for my jet. Probably don't ned one with the jet, but I hate to see the motor stress the transom. Going to the store first thing in the am to get some paint so I can get it done and let it sit for a couple days. I also made a plate for the cable hole. I don't know why Tracker made this so big and oblonged but water often went in here. I made a plate and plan to put two cable boots to keep the water out. One is for the motor cables and the other is for transducers and speedo. [/QUOTE]
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
Tracker Tournament TX Rebuild
Top