TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Boat House
Valco floor mod question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Vermonster" data-source="post: 257012" data-attributes="member: 7992"><p>Hey Sirbiegealot, </p><p>Were you wanting the floor at the height of the seats or just a flat surface to fish from at the floor level?</p><p></p><p>I think if you decked at the seat level the boat may be a bit tippy which is why I opted for the second option and put in a low deck at the floor height.</p><p></p><p>I used 1/2 inch plywood and supported the voids between it and the hull with 2"x"4" that were cut down to the specific depth so to speak. Hit it with 3 coats of spar varnish top and bottom. The next step I'm doing is putting carpet on it. The best part about it is I can remove it whenever I need to wash out the boat or to keep it out of the rain.</p><p></p><p>Take the boat out and stand on the seat of the bow. If it isn't too tippy you may be able to deck the whole thing!</p></blockquote><p></p>
[QUOTE="Vermonster, post: 257012, member: 7992"] Hey Sirbiegealot, Were you wanting the floor at the height of the seats or just a flat surface to fish from at the floor level? I think if you decked at the seat level the boat may be a bit tippy which is why I opted for the second option and put in a low deck at the floor height. I used 1/2 inch plywood and supported the voids between it and the hull with 2"x"4" that were cut down to the specific depth so to speak. Hit it with 3 coats of spar varnish top and bottom. The next step I'm doing is putting carpet on it. The best part about it is I can remove it whenever I need to wash out the boat or to keep it out of the rain. Take the boat out and stand on the seat of the bow. If it isn't too tippy you may be able to deck the whole thing! [/QUOTE]
Verification
Post reply
Forums
Boats
Boat House
Valco floor mod question
Top