Search results

IN looks killer

silly question , what are the cinder blocks for :?:

thanks for the replies , i think i figured out my problem . since i know everything on the trailer is wired right now i decided to check the truck side , the truck allready had the plug when i got it so i assumed #-o it was done right ,insead of just using a T connector it was hard wired into...

i have a HF trailer that i tow with a S10 pickup .the fuse for the brake lights kept blowing so i decided to start from scratch because the way it was wired before i got it was a mess . i installed new lights replaced the wiring harness , ran grounds from the studs on both lights , grounded the...

i'm trying to decide between NOT-A-YACHT , PAID-4 , or MY POS

thanks comstocker the string thing sounds like a good idea . i'm going to be using 2x2s or 2x3s for my framing/bracing under the plywood

this is what i'm trying to put a floor in i'm just trying to get some ideas . would you brace it from side to side or front to back ?

i want to put a floor in my boat , some thing simple and removable to make it more stable to stand up . the boat is a 12' semi-v i'll be using wood (not PT) . my question is how do you determine how to level/brace the floor ? does anyone have any pics on how they did theirs ?

i like the way you did the transom . i've got an older 12ft'er too with a transom like yours , i wished i saw your post and removed the corner braces it would have made it a lot easier to get the shape of the top right

thanks , it's coming along slowly but surely . next step is painting the inside then running the wire for the TM and she'll be ready to float ,some time in the near future i want to put a floor in it. i'll be posting more pictures as i go along

just a few pics of how my boat is comming along ' i've put in the new transom , cut and carpeted new benches and made a place to put the battery in the middle bench ,they're not screwed down yet next step is paint

i have to replace all the wood . the transom was rotted and the bench tops aren't in much better shape . i'm going to put a floor in it just to make it more stable to stand in , here's a pic of the transom

i removed the wood from the middle bench and the foam was a mouse condo , what can i use to replace the blocks of foam that are inside the benches ? here's another pic of my boat

this is my 62 Arkansas Traveler 12' semi V [/img]

i have an older (62) 12' semi v it has the drain in the floor of the boat and a baffle or guard on the underside of the hull right where the trailer bunks line up . if i line up the back of the boat with the rear of the bunks the boat doesn't sit straight on that bunk . would i be better off...

thanks for the replies . i'm going to be mounting 2 seats and i think i'll put them in the center of the benches

hi this might sound like a silly question but , i'm going to mount seats with swivel bases on top of the benches . my question is should i mount the rear seat in the center or should i offset it ? the boat is a 12' v , i'm going to be using a transom mounted trolling motor and might upgrade to...

thanks guys and thanks for the link Brine

first let me start by saying hello , im new to the forum and i just purchased a boat that i'm going to do some mods to and make it a fun little boat . it is a 12' aluminum v Arkansas Traveler and according to the reg it was made in 1962 . i'll get some pictures posted as soon as i get some but...