CedarRiverScooter
Well-known member
- Joined
- Nov 13, 2014
- Messages
- 1,522
- Reaction score
- 5
My project is coming along, so I want to share some photos. I still need to add lateral braces across the bench seat top. I am currently busy untangling all the wires & hoses.
I welded in ribs to bolt the plastic hull to. I used Marine-Tex as a prmer on the aluminum side of glue joint, then 2 tubes of 3M5200 to glue it in. I was going the through-bolt it but have decided it is strong enough without them. (My friend is trying to take his apart & he can't break the 5200 free).
I am going to have 2 seats, side by side, just in front of the engine. I will have a stick steer on center, so I can drive from either seat.
The big problem will be having to wait for open water next month when I get it done!
I welded in ribs to bolt the plastic hull to. I used Marine-Tex as a prmer on the aluminum side of glue joint, then 2 tubes of 3M5200 to glue it in. I was going the through-bolt it but have decided it is strong enough without them. (My friend is trying to take his apart & he can't break the 5200 free).
I am going to have 2 seats, side by side, just in front of the engine. I will have a stick steer on center, so I can drive from either seat.
The big problem will be having to wait for open water next month when I get it done!