Home Grown Basser said:What do you mean looks familiar? :shock: You dont live around the Toano Williamsburg area do you? And if you do that means your probably fishing at Diaschund reservour.
Cheers.
-Kody
Home Grown Basser said:Oh i see. And i did not know that. If i should lose the PT wood what should i replace it with? and i already replaced my angle with alumunum.
Thanks
-Kody
russ010 said:Your trailer is sorta similar to mine... one thing I'd suggest to do to the trailer, is put some of that steel angle you got underneath the tongue in about a 6' length... my boat is front heavy, and it has but a downward bow in the tongue.
Boat looks great!
bassboy1 said:Get a piece of 1/2" round steel bar, or 1/4" x 1" flat bar as a stiffener. Weld each end to the trailer (on the bottom), and in the middle, put a 3 inch spacer. Barstock is very strong when used in tension, and putting the 3 inch spacer block gives it enough triangulation that it puts it in tension when load is applied. Or, if you wanted to be really trick, you could use a bolt with an adjustment nut as the center spacer, so it can be adjusted if things stretch down the road.
Enter your email address to join: