robr3004
Well-known member
So last weekend I picked up my new Tracker 1436, did a lot of planning this week and hope to get everything done this weekend. Unfortunately I'm crammed for time, so for now I'm just installing decks on the floor that are removable. Eventually, I'll put in raised decks with storage.
Here's what I have to install so far:
- Minn Kota Bow Mount PowerDrive V2 55lbs with 60amp Breaker and Quick Release plate
- Minn Kota Transom Mount 50lbs trolling motor with 50amp Breaker. Used mostly for a rudder and cruising across a lake.
- Eagle 320c fishfinder with 5amp Fuse
- 2 12 Volt Everlast Maxx 29D batteries to be connected in parallel
- Guest 2 bank (5amp per bank) on board charger
- Anchor Mate and Anchor
- 3/4 Plywood and Outdoor Carpet for decking
- 9" seat posts, base plates and folding seats
- Berkley Fishing Pole mounts
- Emergency fold up oar and life vest.
Picking up the new boat
Electrical Layout
Front Decking Supports:
Bus Bar's, Trolling Motor Quick Connect and Fish Finder Wired.
Trolling Motor Mounted on Quick Release Plate
Fish Finder Mounted and Wired
Foot Control and Power connected. Everything is powered and working
Batteries and On board charger connected and wired.
Just a quick view of everything installed excepts one of the battery box covers
Here's what I have to install so far:
- Minn Kota Bow Mount PowerDrive V2 55lbs with 60amp Breaker and Quick Release plate
- Minn Kota Transom Mount 50lbs trolling motor with 50amp Breaker. Used mostly for a rudder and cruising across a lake.
- Eagle 320c fishfinder with 5amp Fuse
- 2 12 Volt Everlast Maxx 29D batteries to be connected in parallel
- Guest 2 bank (5amp per bank) on board charger
- Anchor Mate and Anchor
- 3/4 Plywood and Outdoor Carpet for decking
- 9" seat posts, base plates and folding seats
- Berkley Fishing Pole mounts
- Emergency fold up oar and life vest.
Picking up the new boat
Electrical Layout
Front Decking Supports:
Bus Bar's, Trolling Motor Quick Connect and Fish Finder Wired.
Trolling Motor Mounted on Quick Release Plate
Fish Finder Mounted and Wired
Foot Control and Power connected. Everything is powered and working
Batteries and On board charger connected and wired.
Just a quick view of everything installed excepts one of the battery box covers