Recent content by bow_hunter8

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    25 hp evinrude problem!

    That is exactly what im saying it does, start throttling up get maybe half throttle and bam! Cuts off like no spark, idles back down runs fine.. So why would it be overheating? It pumps a ton of water
  2. B

    25 hp evinrude problem!

    Thanks i will try that, it seems to me like it is a overheat safety, or something, it only does it after i run wot for 10 miles or a good ways anyhow, but it dont do it untill i come off of wot slow to just a couple mph and then try to go back to wot. Let it idle around for a bit then it comes...
  3. B

    25 hp evinrude problem!

    also thanks for the previous ideas
  4. B

    25 hp evinrude problem!

    well i have tried all of this so far and it does it only after running for a long period of time and then slowing to an idle, let it set for awhile or let it run at an idle for awhile and it revs right up and off we go!! so any suggestions on that?
  5. B

    20hp 4stroke comparisons

    I run with a boat thats 15' and 44" flat bottom, it has a 20 Suzuki on it and it runs awesome, hits 28 mph on the river
  6. B

    25 hp evinrude problem!

    Thanks
  7. B

    25 hp evinrude problem!

    I mean thats what it sounds like when it does it
  8. B

    25 hp evinrude problem!

    Well its not that it wont rev all the way its like some safety deal, it will rev up rev down rev up rev down real fast, it runs flawlessly other than that, is there a safety switch or somethin that im not finding?? Its most deffinately some kind of electric or mech rev limiting thing,
  9. B

    25 hp evinrude problem!

    I have a 1995 25 hp evinrude console steer that acts like it has a rev limiter sometime when i put it into gear, i have to wiggle the handle throttle control back and forth then it runs great, any ideas?? Thanks
Top