Fishingman48

Just some information to consider on lights. USCG rules say that decorative lighting cannot: be mistaken for navigation lights, impair...

yeah there are! just be careful when dealin with Ebay !!!

The floor is in! Here’s the installed frame with all the foam (in several layers). I fit close to 9 cubic feet which gives me close to...

I have all fiberglass bows, previous owner ran { 6 } of em ' 14ft troller with a full snap cover / thing is when he passed whom ever got...

Yeah, the pounding the bottom & frame is going to be taking at times you're going to need that bracing you're doing I believe so! As...

This is how: What you’re seeing is the wooden frame (2x2) which supports the floor, a stainless angle bracket screwed to the end of...

ok ! that's cool I don't either 'I mean I don't mind kick'in shoe's off once in a while but since handicap with ankles have to abided by...

I had a half bag of polymeric construction sand so I used that. Now that it’s on the board it’s a little more coarse than I’d like but...

HMMMMmmmm !!! my main deck I believe going to do same I'll strip all else and paint those same I'd rather soak 50 to 80 bucks into a...

Nope no rug. Seems like it would get dirty/ratty too quickly. I looked at vinyl but too pricy. Paint is cheapest, and there’s a few...

REASON WHY I AM ASKING IS I HAVE TO PUT NEW FLOOR DOWN AND BOW PLATFORM IN GOOD SHAPE TO JUST BE PAINTED WHEN REINSTALLED INSTEAD OF...

Oh, he's going to use paint on deck no rug? Does that sand in paint really hold up well? SERIOUSLY!???

Looking good! I typically use a slightly thinned coat of paint first, to really soak in and absorb into the wood for the best bond...

I guess I am a lil too late however for future rebuilder's I myself am a newbie as well and have learned a couple tricks. Instead of the...

WHERE THE PROBLEM LAID > It was mentioned that the foam if cut will be open and suck liquid like a sponge. the two side rail boxes were...