TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
jethro
Reaction score
140

Latest activity Postings About

    • jethro
      jethro replied to the thread T-Motor mounting bracket.
      You got that right! My Starcraft has a deck for the trolling motor that was made out of a yield sign and a brake press. Works perfect.
    • jethro
      If it were me I would probably just install inspection covers. I have one of these in my floor for access to the fuel tank sending unit...
    • jethro
      That goes for any boat. If it's new it's a chore keeping it looking like new. If it's older, well, you know that part. Welcome to the...
    • jethro
      jethro replied to the thread New from Halifax, MA.
      Welcome! Grew up in Harvard MA, lived in Plymouth for a while on White Horse Beach. Best friend lives in Abington. We fish out of...
    • jethro
      My brand new Ulterra did the same thing, still does now. I think it's something in the design but I'm not completely sure.
    • jethro
      jethro replied to the thread Adding A Second Motor.
      Honestly I think they just want to make it difficult on people to reduce numbers- unfortunately to no avail. Our designated trout ponds...
    • jethro
      jethro replied to the thread Adding A Second Motor.
      On my 14' Starcraft with a 25hp 2 stroke I used to put a little 6hp 4 stroke on the side to do exactly what you are looking to do. Here...
    • jethro
      jethro replied to the thread LiFePO4 Battery ?.
      I didn't even think you were supposed to connect two different ages of batteries, even of the same type, because the more worn one will...
    • jethro
      The reason they like it further than 2' is the algorithm is based on triangulation and the further away it is from the TM head, the...
    • jethro
      jethro replied to the thread Marine Vinyl Install Question.
      I used contact cement when I did my my Nautolex vinyl. The Nautolex 88 was too dang expensive.
    • jethro
      jethro replied to the thread 1992 Lund Tyee 1850 restoration.
      It's easy to make vinyl seam perfectly. Lay your vinyl down, overlap the pieces where the seam will be. Glue down both sides away from...
    • jethro
      jethro replied to the thread 1992 Lund Tyee 1850 restoration.
      Marine grade is intended for glassing. The only difference in marine grade plywood is the spec calls for less than 10% void space within...
    • jethro
      What size are your graphs and do you have any imaging? As long as they aren't 15's or above and as long as you don't have imaging...
    • jethro
      jethro replied to the thread Battery Boxes OR Trays?.
      It's my understanding that if the battery is punctured a leak is the least of your worries. That said, what Buster said above is a good...
    • jethro
      jethro replied to the thread 5 hp outboard use for trolling.
      Yep, or they are a liar!
  • Loading…
  • Loading…
Top