R
Reaction score
10

Latest activity Postings About

    • R
      Ronbedard57 replied to the thread 1959 Sea King.
      Hi I do use a pleated wheel and clay bars. The grinder has a variable speed trigger which improves the process. I go over the whole...
    • R
      Ronbedard57 replied to the thread 1959 Sea King.
      That is a real looker! Shiny aluminum really turns heads. The Fiberglassics website mentioned above sometimes references advertising...
      • 002.JPG
    • R
      Hi Pretty sure that'll work. The oblong notches could be ground a bit to adjust the fit if you don't remove too much material. Make...
    • R
      Ronbedard57 replied to the thread Boat cover water repellent?.
      Some of those products don't cost a heck of a lot less than the cover you're describing. There's a spray that the camping stores sell...
    • R
      Hi, Using the trailer as a lever is likely the easiest method and requires no tools/equipment. It may also be possible to drive two...
    • R
      Ronbedard57 replied to the thread Classic Beauty.
      So pretty! And built like a little tank! Two transom struts and big cast corner brackets. Love the "wood" deck and curvy windshield.
    • R
      If you can tuck the wires out of harm's way, and if there's room, you might could use a metal blade in a jig saw. More control I think...
    • R
      Ronbedard57 replied to the thread Basic wiring.
      I moved my battery forward for the same reason. Ran extra heavy gauge wire, and installed a block with + and - posts for the trolling...
    • R
      Ronbedard57 replied to the thread First post - rivets ?.
      Hi again, I thought someone would weigh in by now about how the boat sits on the trailer. The photo doesn't show whether there's room...
    • R
      Ronbedard57 replied to the thread First post - rivets ?.
      Hi, After polishing, I give a coat of Turtle wax. During the season, I wipe down with a beach towel and use some of that spray-on...
    • R
      Ronbedard57 replied to the thread First post - rivets ?.
      Hi Nice that you’re able to see the original paint scheme. I’ve had great luck with plain old rust oleum from the home center. You can’t...
    • R
      Ronbedard57 replied to the thread First post - rivets ?.
      Hello, What a beauty! Dale's comments on rivets are spot on. I'd only use blind rivets where the originals were also blind. The...
      • 002.JPG
  • Loading…
  • Loading…
Top