Sea Antsy

no just press it once and then turn the key to start... you pressurize the fuel line with the bulb then pressing in the switch pulls in...

While we are not discussing a "Y" by any means... ? did't the ABYC or what ever that Boating Yacht commission or council have something...

A crimp connector provides a pressure connection to the wire and the terminal A soldered connection connects the wire to a terminal...

Ok so that's ONE looker for a good motor.. .break a Benjamin into 5 easy pieces.. and go to your local outboard sales/repair shops...

I agree with ya bro..we are in the same boat so to speak... here is another consideration... 2cyl vs 1 cyl... I have a 6hp Merc...

Amen to the super clean... IDK 'zactly what is pix there.. but I think I see stainless screws in a row on the top.. and a BIG bolt...

"what were you thinking ?"....puleeeze... he probably FELT... and HOPED... not quite up to THINKING just yet

What DaleH said.."Just please NEVER use wingnuts on a battery. Loose connections can blow a stator on an OB engine. And always put an...

I would be concerned that the flexing would throw the JB Weld out... since it is going to be covered I would go with 3M5200... a...

... width is quoted at the gunwales, by the time the water gets up that high, not much matters but your PFD the shape of the hull has a...

? have you been in the boat without any motor on it, check WHERE your going to be sitting to operate and how comfortable you feel.

weight is the least of your opportunities, distribution will get you wet Plan for worst case, enjoy the best case IMHO you need more boat

Agreed...PHEW... put it in the water and see how it feels without the motor..... put a Spackle bucket with some water in the back...WEAR...

I like zip tie ends... aval in many sizes, conform to irregular holes well, easy to cut....keep a bunch in my drill bit box if there...

WORD....this kind of wisdom is what makes this site great, thanks