sonny.barile

I think it would create drag……

True, if slotted ... definitely add a washer to help 'slide' the OB up or down. Easily accomplished with a car jack under the skeg (keep...

Does your 60hp Merc have slots or holes for the lower two bolts? Both of mine are slotted, but have seen a number of Merc that have...

Mine has hex head bolts on the inside with large flat washers. There is silicone sealant under the washers. The motor bracket side has...

Ah……I didn’t see in th the pics that it was all drilled out. I was thinking it was in great condition. I myself have a thing for those...

problem is the last owner has holes all over the top side from mounting different things like down riggers and i feel for fishing a...

I would restore that boat a bit and use it like it is. The covered bow is nice………..If it’s because you want a trolling motor on the...

Transom elevator will work, if you dont want a jackplate.

Yes it’s doable, and I recently addressed the same concern. Mine ran 2” low for years, but it ran fine. No “issue” from running at that...

That's some nice work right there. Hope I remember how to do this if the need ever arises.

Before you do anything with raising you need to know how it’s operating. There is a recommended rpm range for the motor at wide open...

I think I would have just attached a gate handle to the first piece you made and called it done. Tim...

My Duranautic has holes for that purpose. Im glad it does…..because I fish in brackish and salt water.

https://www.marathonboat.com/