Recent content by zq8blazer

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Z

    Where can I get a livewell at?

    Yes please do. Either in this thread, pm, or email me at [email protected]
  2. Z

    Where can I get a livewell at?

    I have a Monark 1660 and would like to put a livewell in front of the rear cross section and mount a seat on each side. Does anyone know where I could find one like this?
  3. Z

    2001 SeaArk 1548DK DuckHawk Conversion Project

    Thanks! I was thinking if I couldn't fish off of my deck that I could get a wireless or wired bow trolling motor and place it in the floor and just fish that way. I can get a minn kota wired 45lb thrust for around $330.
  4. Z

    Want a foot control trolling motor, idk if I have the room

    Thanks guys, I'm leaning towards the wireless one.
  5. Z

    Capacity plate information.

    You are correct sir. Thnaks.
  6. Z

    Capacity plate information.

    When I purchased my 16' Monark john boat the capacity plate was scratched all up and I believe the reason for this was because the previous owner had put a 75hp engine on it. I was wondering where I could get the information listed on that plate?
  7. Z

    Building a LiveWell - Completed

    So I'm guessing this live well recirculates within the container instead of removing the old water and putting new water from the lake into it?
  8. Z

    Want a foot control trolling motor, idk if I have the room

    It's a 95 Monark 1660mv and the front deck isn't very long. Currently I have no pedestal mounted on it and idk if I have the room to have a seat and be able to use a foot control trolling motor too. I was wondering what you guys think and if anyone has anything similar? Here is a deck similar...
  9. Z

    SlowRollin's 16' Monark project

    Thread digging here, but I have a question about your Jon boat. I have one identical to it only a year newer. I seen that it had/has a mount for a seat on the front deck. I was wondering if you use that and how well it works for you? I'm really wanting to put a foot controlled trolling motor on...
  10. Z

    Need a replacement motor for my 16' MonArk... ideas??

    Did redoing your harness work? Idk if you have a 16' flat bottom or MV, but I have a 16' MV Monark and when I bought it the previous owners had a 75hp Stinger2 motor on it which is above the boats rating. The motor got the boat moving down the lake pretty good, but the boat sat real low in the...
  11. Z

    2001 SeaArk 1548DK DuckHawk Conversion Project

    Great build thread! I have a question. I own a 1995 Monark 1660MV which is very similar to yours. One of the very few things I don't like about mine is the small front deck. I'd love to be able to have a seat up there and a foot controlled trolling motor as I hate having to use a hand...
Top