Search results

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    What i have so far

    ALL the wood was waterproofed!!! From the framing up to the floor. I certainly didn't want to take a chance and do it again next year. I also read that the carpet glue is waterproof as well.
  2. T

    What i have so far

    Thanks guys!! Mofro, Fortunately i didn't have to strip a darn thing!!! This boat was brand spanky new off the truck. ordered it while it was being built at the smokercraft plant :mrgreen: I was even thinking about trying to do some extra work by doing some possible inlays on the side...
  3. T

    What i have so far

    oops....sorry weezer i forget to add that it's a 1648 smokercraft. The boat is rock solid when fishing!!!!
  4. T

    What i have so far

    On the bow i need to tear the trolling motor off and build a platform to make the motor permanant (right now it's rigged up just to fish). Also the plug will be mounted flush so the wires are hidden and not laying on the deck. Also need to mount the fishfinder up there. I want to put some...
  5. T

    What i have so far

    It's certainly not done yet. Want to cover the transom and put in the storage doors for a battery and gas tank compartment...but so far i'm very happy. So here are a couple of pics from bare boat to it's current state. I just flat out couldn't deal with working on it and not fishing...
  6. T

    Dyeguy's 1648 Mod- Pics Update... DONE

    Looking good!!! I think i might steal your floor mat idea :mrgreen: I have the carpet done on mine (same color as yours), and after all the work i put into making it right i DON'T like seeing dirt on it :x :mrgreen:
  7. T

    Carpeting benches and floor board question

    I used the Henry outdoor carpet glue and in the order you said. Layed the wood out, layed the carpet and cut it, spread the glue on the board, layed the carpet on the wood, flipped the board over and stapled. It's extremely easy but can be messy.....for me at least :roll: Make sure you have...
  8. T

    Is this a fair price? Starcraft V-Hull

    I think if i floats then yes $400 is a safe price. But i bet he'd take $350 cash.....or at least it wouldn't hurt to try :mrgreen:
  9. T

    What do you guys pay annually for the launch?

    The majority of lakes in PA are free. It its owned by Fish and boat, DNR, or army corps they are free. There is one lake (wallenpaupack) that HAS a ramp you pay to launch, but there is free Fish and boat access further up the lake. Just as long as a boat is registered or has a permit it's...
  10. T

    Motorguide vs minn kota

    I'll see what i can find. I should be able to find one at a hardware store or one of the box stores.
  11. T

    Motorguide vs minn kota

    I definatly want the peice of mind. I've been told that the minn kota TM's actually have one built in. But i don't have a minn kota so it's a moot point. But i'd rather spend a couple bucks to protect a couple hundred. The book recomends a 50 amp, But from past posts here I figured the 60...
  12. T

    Motorguide vs minn kota

    I have a 46pd thrust motorguide and was planning on getting the minn kota 60 amp circuit breaker but now i see that motorguide actually makes a 50 amp breaker. Do i HAVE to use the motor guide or would it be smarter to just use the minn kota breaker?
  13. T

    wiring up a trolling motor and sonar

    I am about to wire up my trolling motor and sonar and would like to know how this is done. I will have a 60 amp circuit breaker installed as well and there is the fuse for the sonar as well. Does it matter where any of these are wired in? Is the fuse for the fishfinder wired right in with the...
  14. T

    Just got my first Baitcaster.....I need help!!!

    Another tip for you is to not use that whole spool of line. Once you have a target picked out, put a piece of tape around the spool once you have enough line to get to the target and about 10' slack. That way if you do back lash, (you will) it won't be a huge mess to pick out. I think thumbing...
  15. T

    I'm so glad that I bought me a whisker bisquit

    That picture is MANY years old. The story that went with it had nothing to do with arrow length. It was simply a defective arrow. But there is a reason you should keep your arrow cut as close to the rest as possible. It will stabilize quicker.
  16. T

    Baitcaster questions

    I agree with russ about the rod choice. Switching that up may help ya throw different baits. Anyway, I use two BC's, a Citica and a pinnicle something or other #-o. Buy the best you can afford and the reel will do all the work. Also just cast in the drive way for practice. I did that...
  17. T

    Launch etiquette...

    Bingo..exactly what i'm talking about. Russ, I'm not coming down on people trying to be safe, and never will. I said i leave the bow strap attached with a few feet of slack for the boat to float. AND, i leave my truck on the ramp till my boat is tied off. BUT, i'm not sitting at the ramp...
  18. T

    The 2010 Official Vegetable Garden thread!

    hmmmm.....i doubt that fox urine works on skunks and possums. I can honestly say that because i've trapped a couple years now and i can not so proudly say i've caught my fair share of both of them boogers in fox sets. It sure will ATTRACT them...but i highly doubt it repels.
  19. T

    Launch etiquette...

    I unstrap BEFORE i get to the ramp, leaving only the bow hook attached with about 5 feet of slack. Then back in on my turn and when the boat starts to float, i put the truck in park, take the boat to the dock and then park the truck. On a bad day it takes no more than a couple minutes by...
  20. T

    Eagles fan again!

    We can FINALLY start preparing for the next superbowl run!!!!! Mcstab had his shot....failed, and then got old. He shouldn't have had his contract renewed last year. Have fun with him Washington. We might have a rough couple years ahead in Philly with our QB, but at least we're looking...
Top