Search results

Me neither, until now. Motor jumped out the water and shut off immediately and started smokin. Trim and tilt work work now either.

UPDATE* Took the boat out last Saturday. Had her cruising about 28mph up the river next to my house and had an alligator launch off the bank under to boat and take out my lower unit. SMH…. B. O. A. T.

SHES FIXED! Replaced the burnt up rectifier, the bad fuse & holder. Now everything works perfect. Even with the gauges not wired. I have all the gauges after the tach removed and all is good. Thanks again for everyone’s help!! Now fishin time!

Ok good idea I’ll check those.

Fuse is blown and the red wire coming off the rectifier is melted in two. Yes. First time I put it in the water took about 30 min of trying to get it started. I only held the key down 5-6 sec at a time tho. I’ve only taken it out 5 times. Second trip out took 20 min to get started and the...

Ok so I’m restudying it again. When I replaced the front deck I did not re install the courtesy light in the bow. Would that effect anything?

It’s in neutral. Sorry I though mr giggles was saying do not put the motor in gear while running the boat on water muffs.

Dare I ask what’s happens if you bump it in gear??

This is the connectors that broke off

We’ll found this today…

I do not see a connection to the hull. Unless it’s buried under the foam under the rear corner deck.

Some one else told me the same thing. I need to find the common ground??

Thanks, that’s what I thought. Just confused as to where else the purple or blue wires could go since all the gauges are wired and no other devices.

That’s what I don’t understand either. I tried to reconnect and discovered the broken connectors. So I tried reconnecting bypassing those broke gauges and still nothing. That why I was asking what those icons are. Maybe I’m missing a connection somewhere. A friend of mine said he thinks it’s a...

Thanks!

I found this version as well…

Absolutely right I do not know what I’m doing. I already tried to reconnect everything problem is the gauges are so old the plastic housing are cracked or cracking. Which the blue connector broke off the volt gauges. And the Speedo so I have no connectors on them I was thinking that’s what the...

Ok that makes sense. So here’s my problem... I was planning to replace my broken volt gauges also going to remove the water and Speedo gauges as they do not work. Once I cut the purple, blue, and black wires off the gauges v and removed then now motor won’t crank. I would think the motor would...

Terminator icon? As in the wire ends there? I have a blue wire that comes off the Nav/anchor switch to the harness then to the tach then piggy to the volt then that random icon(terminator?)

I have the color chart also. I need to know what the icon in the circle mean. After the purple wire leaves the tach?