Search results

Got quite a bit done the past couple of days. I rebuilt the passenger side of the dash. I had to use my jigsaw to cut the 3/4" poplar. I then sealed it, covered it, and installed the storage compartment. I got the top covered with carpet and split windshield installed. I also got the front...

Yes I read your post about the rivets. It seems I've been spending a lot of time reading this forum and trying to learn as much as possible. Thanks for the reply and posting your project.

I got the hatch lid built and covered. I want to make sure no seams would lift up since it is in a high traffic area. The aluminum trim in the floor protects the floor. The vinyl is tucked under the bottom and then has a 3/8" X 2" trim piece stapled over it to protect the vinyl and make it...

I can't wait to see your 79. Maybe I can learn some things from you. I'll be posting some more pics tonight. I'm having a blast!

Lon, I'm with you on the front batteries. I'm going to secure them so they don't move/bounce. I definitely want as much weight up front as possible. On your question of why two batteries, I don't have to have two, just more secure. I'll be using a Perko switch to select between them. That...

Any progress Stephen?

Got the remaining carpet cut and glued on the inside today. It was a task of patience. I didn't realize how difficult it is to cut carpet to fit on a curved surface. I must have climbed in and out of the boat 50 times to cut and recut carpet. Most of the seams came out really good. I going...

It is hard to keep track. I spent over three weeks getting all the paint off the outside. I would say I have over 100 hours already into it, but it is hard to say.

I'm looking forward to an update and some pics. I'll try to get some work done tomorrow.

I'm not sure about a Patriots rug. I know you can find a Ram rug on discount or they might even pay you to take it.

Brine is correct on the plywood. Use an exterior grade plywood. I suggest sealing/painting before you lay it down and cover. This will help protect it from moisture. Good luck and have fun!

After some debate, I decided to cover the nose and gunwales in three pieces. I did the nose separately and then the two gunwales. I cut carpet so I could clamp the pieces on and then trace the carpet from underneath. I then took the carpet off and cut them out on the driveway. I then used...

You've done a lot of work. I wish I would have considered making my splash well smaller. Keep up the great work and can't wait to see more pics.

Got to spend a few hours this afternoon and laid the vinyl flooring down that I ordered from Cabelas. I ordered the gray/charcoal flooring. I cut the piece down to leave about an inch or so on each side. I laid it as one solid piece vs. covering each piece of the flooring. This will make it...

I used my new Porter Cable jigsaw with a fine tooth blade. I traced the old piece and cut it out. I then took a file and filed off the edges. It was actually pretty easy, just have to take your time and be patient.

I placed some aluminum sheeting under the plywood to provide extra strength when I install the seats. Got the floor put down today and will get the vinyl over it on Wednesday. Next step after that is to get the side panels installed.

Spent a few hours on the boat. Headed out this morning and bought a 4' X 8' sheet of aluminum...they don't give it away. I then cut our the nose piece and then filed the edges and drilled the holes. I then spent an hour or so getting the cross brace loose and recovering it with the charcoal...

Sorry Shawnfish...that was a typo. I primed/sealed today and painting tomorrow before laying down. You must have either thought I was crazy or had some new theory about preserving wood.

Got to work on my boat for about four hours today. I got the bracing on the front of the boat replaces pretty easily. I then began cutting out the floor pieces. I got a new Porter Cable jigsaw for Christmas early and it was awesome. It blows away the sawdust so you can follow your line and...

Thanks for posting your project. I'm doing a 16' Sylvan. I gutted it as well (see pics on my project). I got the outside painted. Got the trailer painted and lights fixed on it. I'm lowering the trailer tomorrow to make it easier to launch. I'm going to put in the floor soon and begin...