TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Jet Boats
General Jet Boat Discussions
Jet jon cavitation issues
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="PSG-1" data-source="post: 319908" data-attributes="member: 6937"><p>The half dollar sized chunk missing from the prop is definitely the culprit! You should notice a DRAMATIC improvement in performance after installing the solas prop.</p><p></p><p>When you say 'drive cone' are you referring to the cone on the back end of the stator? If those mounting bolt ears are busted, when you pull that cone to replace it, you need to check to see if water infiltrated the bearings. If so, you'll need to change those out. If not, then, be sure to replace the O-ring when you replace the stator cone.</p><p></p><p>Also, as I mentioned before, be sure to check the stator vanes for damage, in case that missing chunk of impeller shot through and hit something.</p></blockquote><p></p>
[QUOTE="PSG-1, post: 319908, member: 6937"] The half dollar sized chunk missing from the prop is definitely the culprit! You should notice a DRAMATIC improvement in performance after installing the solas prop. When you say 'drive cone' are you referring to the cone on the back end of the stator? If those mounting bolt ears are busted, when you pull that cone to replace it, you need to check to see if water infiltrated the bearings. If so, you'll need to change those out. If not, then, be sure to replace the O-ring when you replace the stator cone. Also, as I mentioned before, be sure to check the stator vanes for damage, in case that missing chunk of impeller shot through and hit something. [/QUOTE]
Verification
Post reply
Forums
Jet Boats
General Jet Boat Discussions
Jet jon cavitation issues
Top