my boat mod

[basschamp]

hello everyone, i just got a brand new 12ft vhull and it has been sitting against my fence for about 2 weeks now. I am all siked to start modifying it! i couldnt get any pics of my specific boat but here are some pics from the website. I want to put a front and back casting deck, and a lower deck in between the 1st and 2nd bench. I will also have a cooler for a livewell and a few storage compartments. I hope it will be done around spring. i cant figure out how to post pics, so if one of you could give me instuctions it would be easier then giving links. but here is the link https://ep.yimg.com/ca/I/1stdirect_2085_13489789 https://ep.yimg.com/ca/I/1stdirect_2088_33734603

 

[jasper60103]

Nice rig.
Here's a link to help you with posting pics.

https://www.tinboats.net/forum/viewtopic.php?f=1&t=3664

 

[Doug]

:WELCOME: Aboard. Nice looking rig.

 

[basschamp]

thank you all, and thanks for the instructions on the picture posting. If the snow holds of i will start to cut some more wood and fit it into the boat for the base of the deck.

 

[Jim]

great looking boat! Looking forward to seeing the build.

 

[basschamp]

hi guys, my boat is turned over now so i just scraped off all the snow with a plastic shovel( i didnt yous a metal one because i didnt want to damage the boat.) and i will start the mod when my friend gets here in a couple hours. I will post some pics later 2day.

 

[basschamp]

hey guys, we just finished moding for the 1st day, it started with wedging the boat off the ground because it was frozen. After that we cut out some supporters for the back deck and then we made some supporters for the lower deck and livewell.
1in picture 1 you will see the pieces that will support the back deck
2the second picture you will se are big storage bin that we will store coats and boxes in for the front deck, we just have to figure out how to secure it, we were thinking mighty putty, or do you guys have a better idea?
3 in picture three you will see the back supporting pieces and then the lower deck supporting pieces.
4 you will see the lower deck supporting pieces

please tell us how you think we are doing, our next job will be to cut out the livewell supporting pieces, we would have done it today but we didnt have the cooler to take the measurements.

here is the link https://www.topwaterpro.com/portfolio.html

 

[Bugpac]

Looking good, IMG the photos to the thread, you might get a lot more response that way... I myself hate chasing links..