Jeremyray25
Member
- Joined
- May 21, 2013
- Messages
- 19
- Reaction score
- 0
Guys, below are some snapshots of my first mod with my recently purchased 1442.
Here is snapshot before starting:
Here is the frame:
Here is the plywood cut:
Here is carpeted deck with hatches cut:
And lastly everything on deck done:
I'm pretty happy with the way it turned out. I made the frame so that it is completely removable without attaching to the hull. This way I could remove and clean if needed. Last weekend I also completed my wiring and sketched up a mount for my transom trolling motor, I'm going to place on the bow.
Here is snapshot before starting:
![Original%2520Front.JPG](https://proxy.imagearchive.com/d0f/d0f8ef5109042c83b106cf34a46b32d9.jpg)
Here is the frame:
![frame.JPG](https://proxy.imagearchive.com/a24/a243a0af1d261b56937f99e753ee9aa7.jpg)
Here is the plywood cut:
![deck2.JPG](https://proxy.imagearchive.com/42f/42fbd646c9f30b327a6d2ea5fe18e544.jpg)
Here is carpeted deck with hatches cut:
![carpet%2520back%2520view.JPG](https://proxy.imagearchive.com/e85/e85647b35462befd5b6ffde1c6dca7ea.jpg)
And lastly everything on deck done:
![finished%2520carpet%25202.JPG](https://proxy.imagearchive.com/bd6/bd67c61d8794de73f01a5bf2ee5d49dd.jpg)
![finished%2520carpet%25201.JPG](https://proxy.imagearchive.com/543/5436e74172081462ec18ba68a406caf9.jpg)
I'm pretty happy with the way it turned out. I made the frame so that it is completely removable without attaching to the hull. This way I could remove and clean if needed. Last weekend I also completed my wiring and sketched up a mount for my transom trolling motor, I'm going to place on the bow.