It is currently 17 Nov 2018, 02:42
Join the free forum or login with your account and the annoying banner goes away

SwampRunner

All times are UTC - 5 hours [ DST ]




 Page 2 of 5 [ 74 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
PostPosted: 04 Jun 2010, 16:05 
User avatar

Joined: 17 Dec 2008, 13:20
Posts: 244
Location: Waxahachie, Texas
Just bought wheel bearing kits to redo my tilt-Dilly single axle trailer from etrailer.com. All bearings, races, seals, and cotter pins shipped to my house for under $25. Ordered it Sunday night and received an email that it shipped on Memorial Day!

http://www.etrailer.com/



_________________
Image THE MINNOW BUCKET
Offline
 Profile WWW  
 
PostPosted: 05 Jun 2010, 01:39 
User avatar

Joined: 18 Jan 2009, 20:22
Posts: 1690
Location: Central Illinois
www.ebay.com

buyer beware!

However there are some good vendors who use ebay as thier store front.



_________________
HOI Crappie Club
Where family and friends come to compete for a little more than bragging rights.


'97 16' Sylvan Back Troller Select
'67 14' Alumacraft
'57 Model FD11 18-hp Johnson Seahorse
'09 Traverse FWD V6 w/ towing package, power sun and moon roof, and ton of other options. The only one I wanted was the towing package. :mrgreen:
Offline
 Profile  
 
PostPosted: 08 Jun 2010, 15:34 

Joined: 11 May 2010, 21:35
Posts: 25
Location: Albany, NY
Amazing carpet for the price... purchased the 6' x 20' and wish I got the 8'6" x 25' for my 14.5' build. Goes quick with all of the cuts and what not.

http://www.sportsmansguide.com/net/cb/cb.aspx?a=650798



_________________
1988 Sea Nymph "Fishing Machine" - FM-142
Upstate, NY
View my work in progress modification http://www.tinboats.net/forum/viewtopic.php?f=21&t=13740
Offline
 Profile  
 
PostPosted: 27 Jun 2010, 02:46 
User avatar

Joined: 18 May 2009, 01:05
Posts: 58
Location: Elyria Ohio
You might think I'm joking, But by far the best price on my boat seats and 97 cent shipping to my door. They have 10x the stuff online-only vs. the stock in the store...


http://www.walmart.com/



_________________
Live life outside!
Offline
 Profile  
 
PostPosted: 08 Jul 2010, 00:54 
User avatar

Joined: 04 Jul 2010, 01:08
Posts: 7
Location: Grapevine, TX. (DFW)
Here is a link to high-density polyurethane foam core composite board, which is a lighter weight substitute of marine grade plywood. Injected foam between two sheets of fiberglass. 4x8 sheet of 3/4" weighs 49# compared to 65# plywood. Expensive at $180 a sheet, but impervious to gas, oil, water and very strong, light weight, and rigid. Just needs to be painted to protect from UV light. Cuts with standard wood blades. Located in Grand Prairie, TX. (Between Dallas and Fort Worth)
They also do really thick custom transom pieces as well.


http://www.kayco-composites.com/index.html


Offline
 Profile  
 
PostPosted: 08 Jul 2010, 17:36 
Moderator
User avatar

Joined: 18 Jan 2009, 11:19
Posts: 3268
Location: GA
94silverbeast wrote:
I am looking for some kind of foam i can fill my boat with. I looked into just the spray foam you get at a local hardware store but a buddy of mine told me he used it and didnt have good results with it. Looking for something i can mix or 2part or something. Please help thanks


never used it.... I know at least one member used something similar.

http://www.jamestowndistributors.com/userportal/show_product.do?pid=2198&BASE



_________________
Brine Craft - 16ft Mod V
Offline
 Profile  
 
PostPosted: 05 Nov 2010, 01:47 
User avatar

Joined: 07 Sep 2010, 22:44
Posts: 224
Location: Reedsville,Pa.
I just ordered a 12 oz. can of the "Lab Metal" to repair the dings and such on my flat bottom project that I have going on right now.
https://www.net4sale.com/Shop/pc/home.asp



_________________
"Panfish Slayer" and the occasional "Green Carp"
My 14' Flat Bottom Project!

Sea Nymph Striper CC-191 (Reborn)
Offline
 Profile  
 
PostPosted: 11 Nov 2010, 11:31 

Joined: 28 Aug 2010, 11:42
Posts: 9
I'm giving serious consideration to this stuff for my deck: http://www.lockdry.com/lockdrydemo.htm

Anybody had experience with it? Looks ideal for an aluminum boat floor.



My boat: http://www.tinboats.net/forum/viewtopic.php?f=21&t=16197


Offline
 Profile  
 
PostPosted: 12 Nov 2010, 11:00 

Joined: 28 Aug 2010, 11:42
Posts: 9
lbursell wrote:
Looks like somthing that could be made to work. Are you going to orient the panels bow to stern or port to starboard ? I'd suggest giving a lot of thought to your support framing underneath. Framing around hatches and/or livewell could get interesting, but certanily not impossible. Same thing for matching the curvature of your hull. If you go this route, post LOTS of pics.


I was definitely leaning toward stern to bow... it comes in up to 30' lengths (pretty nice). The floor will slope toward the stern. Yeah framing will need to be solid, but this stuff isn't weak either (can go 24" on center, 240 PSF live-load on 36" centers). Running port to starboard would allow longer storage under the floor, but wouldn't look as good or drain to the back as well.


Offline
 Profile  
 
PostPosted: 16 Nov 2010, 12:31 
User avatar

Joined: 07 Sep 2010, 22:44
Posts: 224
Location: Reedsville,Pa.
Here are some pretty cool floor matting for aluminum boats.A little expensive but very nice.
https://styx-river.com/products/?catego ... ry=6&id=31



_________________
"Panfish Slayer" and the occasional "Green Carp"
My 14' Flat Bottom Project!

Sea Nymph Striper CC-191 (Reborn)
Offline
 Profile  
 
PostPosted: 24 Nov 2010, 17:04 
User avatar

Joined: 26 May 2010, 00:03
Posts: 196
Location: Boca Raton, FL
http://www.suspensionconnection.com

Has all kinds of parts for your towing vehicle. I bought my tow hitch, receiver, ball, and light harness from them. Cheap prices, and fast delivery.



_________________
Rippin' Lips on a daily basis.
My 2010 Tracker 1436 Mod: viewtopic.php?f=21&t=16300
Offline
 Profile  
 
PostPosted: 29 Nov 2010, 14:07 
User avatar

Joined: 07 Sep 2010, 22:44
Posts: 224
Location: Reedsville,Pa.
94silverbeast wrote:
I am looking for some kind of foam i can fill my boat with. I looked into just the spray foam you get at a local hardware store but a buddy of mine told me he used it and didnt have good results with it. Looking for something i can mix or 2part or something. Please help thanks

I found these guys and am going to order some when I get my center bench cut out and closed off in the very near future.Take a look.
http://www.jgreer.com/boat-foam.htm



_________________
"Panfish Slayer" and the occasional "Green Carp"
My 14' Flat Bottom Project!

Sea Nymph Striper CC-191 (Reborn)
Offline
 Profile  
 
PostPosted: 17 Dec 2010, 17:35 

Joined: 15 Nov 2010, 22:21
Posts: 63
Location: Nicholson, Pa
I purchased my used 18 foot Jon boat and restoring this winter. Since it was a used boat it has seen its share of beaching. All my other boats are semi V's with nice thick keels and I wasn't concerned with beaching. The river I fish has poor launches at best (no docks) so you have to beach each time you go out. I'm a guide on the river so I'm always launching and removing. The 18 footer has 4 keels which are pretty worn. I searched the web for keel guards. A few companies wouldn't recommend using their product on a Jon boat. Until I found Keel Shield www.keelshield.com KS Marine Product
These people went out of their way to accommodate me. They sent me a sample of keel guards, and easy to follow instructions, great color selection, and its a life time guarantee. They also make skeg guards, bow guards. I highly recommend them, they stand behind their product!


Offline
 Profile  
 
PostPosted: 11 Feb 2011, 09:39 

Joined: 07 Jan 2011, 10:14
Posts: 919
Location: Bryceville, FL (NE of Jacksonville.Fl)
http://www.harborfreight.com/automotive ... 41144.html

I came across this solar battery charger today looking for stuff for my boat.

Not sure if anyone has tried one of these, but it might be nice to have on those long days on the water when your trolling motor is getting a lot of use. You could just connect it to your batt. and as long as the sun is shining you are getting a little bit of a charge and not killing your battery!


Offline
 Profile  
 
PostPosted: 19 Apr 2011, 16:09 
User avatar

Joined: 17 Apr 2011, 09:53
Posts: 93
Location: Waltham, Maine
New user, older post. Just found this place! Prices are great and they will help you with shipping!!!

http://www.discountsteel.com/


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 2 of 5 [ 74 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 58 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Join the free forum or login with your account and the annoying banner goes away

akmccallumco