SamFletcher
New member
- Joined
- May 1, 2018
- Messages
- 4
- Reaction score
- 0
First time here. I got a aero craft 14 footer. I got it stripped down and a few holes welded. I’m going to Gluvit the seams and rivets then paint. Questions are: the transom is bent. How can I repair that? I don’t really what to tear out all the rivets and totally rebuild it. This boat is functional not a show queen. As of now I will only be using trolling motors. Second I’m going to put a floor in to have a nice area to stand. Any ideas how to fram it? I was thinking of using red wood because I’m not great at working with aluminum. How do I make sure the floor will be level when the boat is in the water. Also is there a way to attach framing to the boat with out putting holes in it. Thanks.