Recent content by Edintampa

Those boats were in a rescue scene in the movie "Act Of Valor".

IF you have a Big Lots store near by they have some stuff called "Awsome" that works great and very cheap too!

Turbo, the one I have is a 2000 model on a 2000 G3 16' MV. I am running 3/8 hose to it currently. What boat are you running yours on and what kind of MPH are you getting? Ed

Thanks, I am going to move it and see what happens,

Thanks guys I appreciate the responses. I had a 15 hp 1980 Johnson I had issues with when I moved the tank towards the front. None when I moved it back to the transom on another boat.

I have a 25hp 4 stroke Yamaha and want to move it perhaps more centered and not leave it in the back transom well to shift some weight towards the front. How far away from the back can I move it and still have the motor fuel pump not have any issues with pulling in the gas? Should I leave it...

Bobber, Great build you have going on there. What resin and bed liner are you using? Ed

Scout Thanks a lot for that information. I was wondering how a product like that or even Tuffcoat would work on plywood. I had considered .09 or .125 aluminum but they are much heavier per sheet than 1/2 plywood almost twice as heavy which surprised even me. I have been thinking about doing...

Eric I have a couple of questions. Nice looking boat you have. I have thought about running two tanks and I saw that you use a T to join them together. The motor will pull evenly from both tanks at the same time? I have a 25 hp Yamaha 4 stroke. Thanks, Ed

River Bottom, How would you compare the two and how much more is Sea Deck than Hydro turf? Ed

Z Where did you get your flooring mats? Ed

Where did you get the "turf" from? I have been looking at that online and comparing to the Seadeck but from what I have read the Hydroturf is much cheaper. I am redoing a G3 1648 MV and am torn between the carpet and plywood or Aliminum and Hyroturf or Sea deck. I want to keep the costs down...

The boat is looking good! What did you paint it with ?

Most of the guys on here use 5200, jb weld for aluminum or other types. Best case scenario would have it welded by someone that does aluminum. Others will chime in I am sure. I lived in Cumming for 8 years and spent a lot of time on Lake Lanier in the 90's, before Cumming grew like crazy. Ed